Toyota Pickup 5th Gen 1989-1995 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Toyota Pickup built from 1989 to 1995 (DLX 4WD, SR5 4WD).

Fitment specs

Bolt pattern6X139.7
Center bore106.1 mm
Lug threadM12x1.5
Model years1989-1995
Generation5th Gen

Every 1989-1995 Toyota Pickup uses a 6X139.7 bolt pattern with a 106.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 106.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Toyota Pickup (5th Gen) and the model years each was sold. All of them share the 6X139.7 bolt pattern.

SubmodelYears
DLX 4WD1989-1995
SR5 4WD1989-1995

Factory wheel sizes

Wheel sizes Toyota fitted to the 1989-1995 Toyota Pickup from the factory. Offsets are ET in millimeters.

Factory size
15x6 +0
15x7 +8

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 1989-1995 Toyota Pickup: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
15-17"6"-17 to +5
15-17"6.5"-11 to -1

Wider still: 15x7.5 -19 to -8; 16x7.5 -19 to -8; 17x7.5 -19 to -8 fit with modifications (torsion-bar crank or 2-3 in. lift, trim front bumper / fender lip at full lock, trim or remove mud flaps).

FAQ

What is the bolt pattern of the 1989-1995 Toyota Pickup?

The 1989-1995 Toyota Pickup (5th Gen) uses a 6X139.7 bolt pattern and a 106.1 mm center bore.

What size wheels came on the 1989-1995 Toyota Pickup from the factory?

Factory sizes: 15x6 +0; 15x7 +8.

What lug thread size does the 1989-1995 Toyota Pickup use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 1989-1995 Toyota Pickup without modifications?

Bolt-on sizes run from 15" to 17" in diameter; see the size table for the offset range at each width.