Toyota Previa (XR10/XR20) 1991-1997 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Toyota Previa built from 1991 to 1997 (DX, LE).

Fitment specs

Bolt pattern5X114.3
Center bore60.1 mm
Lug threadM12x1.5
Model years1991-1997
GenerationXR10/XR20

Every 1991-1997 Toyota Previa uses a 5X114.3 bolt pattern with a 60.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 60.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Toyota Previa (XR10/XR20) and the model years each was sold. All of them share the 5X114.3 bolt pattern.

SubmodelYearsFactory wheel sizes
DX1991-199714x6 +50
LE1991-199714x6 +50

Factory wheel sizes

Wheel sizes Toyota fitted to the 1991-1997 Toyota Previa from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
14x6 +50
15x6 +50

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 1991-1997 Toyota Previa: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
14-16"6"+33 to +55
14-16"6.5"+39 to +49

Wider still: 14x7.5 +31 to +42; 15x7.5 +31 to +42; 16x7.5 +31 to +42 fit with modifications (trim front bumper cover / fender liner at full lock, roll rear fender lips, hub-centric rings for aftermarket wheels).

FAQ

What is the bolt pattern of the 1991-1997 Toyota Previa?

The 1991-1997 Toyota Previa (XR10/XR20) uses a 5X114.3 bolt pattern and a 60.1 mm center bore.

What size wheels came on the 1991-1997 Toyota Previa from the factory?

Factory sizes: 14x6 +50; 15x6 +50.

What lug thread size does the 1991-1997 Toyota Previa use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 1991-1997 Toyota Previa without modifications?

Bolt-on sizes run from 14" to 16" in diameter; see the size table for the offset range at each width.