Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Toyota Prius v built from 2012 to 2017 (Two, Three, Five).
Every 2012-2017 Toyota Prius v uses a 5X114.3 bolt pattern with a 60.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 60.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Toyota Prius v (ZVW40) and the model years each was sold. All of them share the 5X114.3 bolt pattern.
| Submodel | Years |
|---|---|
| Two | 2012-2017 |
| Three | 2012-2017 |
| Five | 2012-2017 |
Wheel sizes Toyota fitted to the 2012-2017 Toyota Prius v from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 16x6.5 +39 |
| 17x7 +45 |
Widths and offsets with Verified Fitment on the 2012-2017 Toyota Prius v: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 16-17" | 6.5" | +22 to +44 |
| 16-17" | 7" | +28 to +38 |
Wider still: 16x8 +20 to +31; 17x8 +20 to +31 fit with modifications (roll front and rear fender lips, front camber bolts for extra negative camber, hub-centric rings for aftermarket wheels).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2012-2017 Toyota Prius v. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.
Modifications Required (roll front and rear fender lips, front camber bolts for extra negative camber, hub-centric rings for aftermarket wheels)
The 2012-2017 Toyota Prius v (ZVW40) uses a 5X114.3 bolt pattern and a 60.1 mm center bore.
Factory sizes: 16x6.5 +39; 17x7 +45.
Its wheel fasteners use a M12x1.5 thread.
Bolt-on sizes run from 16" to 17" in diameter; see the size table for the offset range at each width.