Toyota Sequoia (XK60) 2008-2022 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Toyota Sequoia built from 2008 to 2022 (SR5, Limited, Platinum, TRD Sport, TRD Pro, Nightshade).

Fitment specs

Bolt pattern5X150
Center bore110.1 mm
Lug threadM14x1.5
Model years2008-2022
GenerationXK60

Every 2008-2022 Toyota Sequoia uses a 5X150 bolt pattern with a 110.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 110.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Toyota Sequoia (XK60) and the model years each was sold. All of them share the 5X150 bolt pattern.

SubmodelYearsFactory wheel sizes
SR52008-202218x8 +60
Limited2008-202218x8 +60
20x8 +60
Platinum2008-202220x8 +60
TRD Sport2018-202020x8 +60
TRD Pro2020-202218x8 +60
Nightshade2021-2022See factory sizes below

Factory wheel sizes

Wheel sizes Toyota fitted to the 2008-2022 Toyota Sequoia from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
18x8 +60
20x8 +60
22x9 +50

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2008-2022 Toyota Sequoia: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

SR5, Limited, TRD Pro, Nightshade

DiameterWidthOffset range
18-22"8"+43 to +65
18-22"8.5"+49 to +59

Wider still: 18x9.5 +41 to +52; 19x9.5 +41 to +52; 20x9.5 +41 to +52; 21x9.5 +41 to +52; 22x9.5 +41 to +52 fit with modifications (2-3 in. leveling kit, trim front bumper valance and mud flaps, trim or heat-form fender liners at full lock).

Platinum, TRD Sport

DiameterWidthOffset range
20-22"8"+43 to +65
20-22"8.5"+49 to +59

Wider still: 20x9.5 +41 to +52; 21x9.5 +41 to +52; 22x9.5 +41 to +52 fit with modifications (2-3 in. leveling kit, trim front bumper valance and mud flaps, trim or heat-form fender liners at full lock).

FAQ

What is the bolt pattern of the 2008-2022 Toyota Sequoia?

The 2008-2022 Toyota Sequoia (XK60) uses a 5X150 bolt pattern and a 110.1 mm center bore.

What size wheels came on the 2008-2022 Toyota Sequoia from the factory?

Factory sizes: 18x8 +60; 20x8 +60; 22x9 +50.

What lug thread size does the 2008-2022 Toyota Sequoia use?

Its wheel fasteners use a M14x1.5 thread.

What aftermarket wheel sizes fit the 2008-2022 Toyota Sequoia without modifications?

Bolt-on sizes run from 18" to 22" in diameter; see the size table for the offset range at each width.