Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Toyota Tundra built from 2007 to 2021 (Base, SR, SR5, Limited, Platinum, 1794 Edition, TRD Pro).
Every 2007-2021 Toyota Tundra uses a 5X150 bolt pattern with a 110.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 110.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Toyota Tundra (XK50) and the model years each was sold. All of them share the 5X150 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| Base | 2007-2013 | See factory sizes below |
| SR | 2014-2021 | 18x8 +60 |
| SR5 | 2007-2021 | 18x8 +60 |
| Limited | 2007-2021 | 18x8 +60 |
| Platinum | 2010-2021 | 20x8 +60 |
| 1794 Edition | 2014-2021 | 18x8 +60 |
| TRD Pro | 2015-2021 | 18x8 +60 |
Wheel sizes Toyota fitted to the 2007-2021 Toyota Tundra from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 17x8 +50 |
| 18x8 +60 |
| 20x8 +60 |
Widths and offsets with Verified Fitment on the 2007-2021 Toyota Tundra: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 17-22" | 8" | +43 to +65 |
| 17-22" | 8.5" | +49 to +59 |
Wider still: 17x9.5 +41 to +52; 18x9.5 +41 to +52; 19x9.5 +41 to +52; 20x9.5 +41 to +52; 21x9.5 +41 to +52; 22x9.5 +41 to +52 fit with modifications (torsion-bar crank or 2-3 in. lift, trim front bumper / fender lip at full lock, trim or remove mud flaps).
| Diameter | Width | Offset range |
|---|---|---|
| 18-22" | 8" | +43 to +65 |
| 18-22" | 8.5" | +49 to +59 |
Wider still: 18x9.5 +41 to +52; 19x9.5 +41 to +52; 20x9.5 +41 to +52; 21x9.5 +41 to +52; 22x9.5 +41 to +52 fit with modifications (torsion-bar crank or 2-3 in. lift, trim front bumper / fender lip at full lock, trim or remove mud flaps).
| Diameter | Width | Offset range |
|---|---|---|
| 20-22" | 8" | +43 to +65 |
| 20-22" | 8.5" | +49 to +59 |
Wider still: 20x9.5 +41 to +52; 21x9.5 +41 to +52; 22x9.5 +41 to +52 fit with modifications (torsion-bar crank or 2-3 in. lift, trim front bumper / fender lip at full lock, trim or remove mud flaps).
The 2007-2021 Toyota Tundra (XK50) uses a 5X150 bolt pattern and a 110.1 mm center bore.
Factory sizes: 17x8 +50; 18x8 +60; 20x8 +60.
Its wheel fasteners use a M14x1.5 thread.
Bolt-on sizes run from 17" to 22" in diameter; see the size table for the offset range at each width.