Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Toyota Yaris built from 2007 to 2011 (Base, S).
Every 2007-2011 Toyota Yaris uses a 4X100 bolt pattern with a 54.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 54.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Toyota Yaris (XP90) and the model years each was sold. All of them share the 4X100 bolt pattern.
| Submodel | Years |
|---|---|
| Base | 2007-2011 |
| S | 2007-2011 |
Wheel sizes Toyota fitted to the 2007-2011 Toyota Yaris from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 14x5 +45 |
Widths and offsets with Verified Fitment on the 2007-2011 Toyota Yaris: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 14-17" | 5" | +15 to +54 |
| 14-17" | 5.5" | +22 to +47 |
| 14-17" | 6" | +28 to +41 |
| 14-17" | 6.5" | +35 |
Wider still: 14x7 +20 to +31; 15x7 +20 to +31; 16x7 +20 to +31; 17x7 +20 to +31 fit with modifications (roll front and rear fender lips, front camber bolts for extra negative camber, hub-centric rings for aftermarket wheels).
The 2007-2011 Toyota Yaris (XP90) uses a 4X100 bolt pattern and a 54.1 mm center bore.
Factory sizes: 14x5 +45.
Its wheel fasteners use a M12x1.5 thread.
Bolt-on sizes run from 14" to 17" in diameter; see the size table for the offset range at each width.