Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Toyota Yaris iA built from 2017 to 2018.
Every 2017-2018 Toyota Yaris iA uses a 4X100 bolt pattern with a 54.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 54.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Toyota Yaris iA (DJ) and the model years each was sold. All of them share the 4X100 bolt pattern.
| Submodel | Years |
|---|---|
| Base | 2017-2018 |
Wheel sizes Toyota fitted to the 2017-2018 Toyota Yaris iA from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 15x5.5 +40 |
| 16x5.5 +40 |
Widths and offsets with Verified Fitment on the 2017-2018 Toyota Yaris iA: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 15-17" | 5.5" | +23 to +45 |
| 15-17" | 6" | +29 to +39 |
Wider still: 15x7 +21 to +32; 16x7 +21 to +32; 17x7 +21 to +32 fit with modifications (roll front and rear fender lips, front camber bolts for extra negative camber, hub-centric rings for aftermarket wheels).
The 2017-2018 Toyota Yaris iA (DJ) uses a 4X100 bolt pattern and a 54.1 mm center bore.
Factory sizes: 15x5.5 +40; 16x5.5 +40.
Its wheel fasteners use a M12x1.5 thread.
Bolt-on sizes run from 15" to 17" in diameter; see the size table for the offset range at each width.