Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Volkswagen Arteon built from 2019 to 2023 (SE, SEL R-Line, SEL Premium R-Line).
Every 2019-2023 Volkswagen Arteon uses a 5X112 bolt pattern with a 57.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 57.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Volkswagen Arteon (1st Gen (3H)) and the model years each was sold. All of them share the 5X112 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| SE | 2019-2021 | 18x8 +40 |
| SEL R-Line | 2019-2023 | 19x8 +40 |
| SEL Premium R-Line | 2019-2023 | 20x8 +40 |
Wheel sizes Volkswagen fitted to the 2019-2023 Volkswagen Arteon from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 17x7 +38 |
| 17x7.5 +40 |
| 18x8 +40 |
| 19x8 +40 |
| 20x8 +40 |
Widths and offsets with Verified Fitment on the 2019-2023 Volkswagen Arteon: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 18-21" | 8" | +23 to +45 |
| 18-21" | 8.5" | +29 to +39 |
Wider still: 18x9.5 +21 to +32; 19x9.5 +21 to +32; 20x9.5 +21 to +32; 21x9.5 +21 to +32 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (57.1 mm), correct-length ball-seat lug bolts).
| Diameter | Width | Offset range |
|---|---|---|
| 19-21" | 8" | +23 to +45 |
| 19-21" | 8.5" | +29 to +39 |
Wider still: 19x9.5 +21 to +32; 20x9.5 +21 to +32; 21x9.5 +21 to +32 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (57.1 mm), correct-length ball-seat lug bolts).
| Diameter | Width | Offset range |
|---|---|---|
| 20-21" | 8" | +23 to +45 |
| 20-21" | 8.5" | +29 to +39 |
Wider still: 20x9.5 +21 to +32; 21x9.5 +21 to +32 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (57.1 mm), correct-length ball-seat lug bolts).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2019-2023 Volkswagen Arteon. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.












Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (57.1 mm), correct-length ball-seat lug bolts)


















Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (57.1 mm), correct-length ball-seat lug bolts)





Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (57.1 mm), correct-length ball-seat lug bolts)







The 2019-2023 Volkswagen Arteon (1st Gen (3H)) uses a 5X112 bolt pattern and a 57.1 mm center bore.
Factory sizes: 17x7 +38; 17x7.5 +40; 18x8 +40; 19x8 +40; 20x8 +40.
Its wheel fasteners use a M14x1.5 thread.
Bolt-on sizes run from 18" to 21" in diameter; see the size table for the offset range at each width.