Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Volkswagen Cabriolet built from 1980 to 1993.
Every 1980-1993 Volkswagen Cabriolet uses a 4X100 bolt pattern with a 57.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 57.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Volkswagen Cabriolet (Mk1) and the model years each was sold. All of them share the 4X100 bolt pattern.
| Submodel | Years |
|---|---|
| Base | 1980-1993 |
Wheel sizes Volkswagen fitted to the 1980-1993 Volkswagen Cabriolet from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 13x5 +38 |
| 13x5.5 +38 |
| 14x6 +38 |
| 15x6 +38 |
Widths and offsets with Verified Fitment on the 1980-1993 Volkswagen Cabriolet: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 13-15" | 5.5" | +21 to +43 |
| 13-15" | 6" | +27 to +37 |
Wider still: 13x7 +19 to +30; 14x7 +19 to +30; 15x7 +19 to +30 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (57.1 mm), correct-length ball-seat lug bolts).
The 1980-1993 Volkswagen Cabriolet (Mk1) uses a 4X100 bolt pattern and a 57.1 mm center bore.
Factory sizes: 13x5 +38; 13x5.5 +38; 14x6 +38; 15x6 +38.
Bolt-on sizes run from 13" to 15" in diameter; see the size table for the offset range at each width.