Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Volkswagen Corrado built from 1990 to 1992.
Every 1990-1992 Volkswagen Corrado uses a 4X100 bolt pattern with a 57.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 57.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Volkswagen Corrado and the model years each was sold. All of them share the 4X100 bolt pattern.
| Submodel | Years |
|---|---|
| G60 | 1990-1992 |
Wheel sizes Volkswagen fitted to the 1990-1992 Volkswagen Corrado from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 14x6 +38 |
| 15x6 +35 |
| 16x6.5 +35 |
Widths and offsets with Verified Fitment on the 1990-1992 Volkswagen Corrado: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 14-17" | 6" | +21 to +44 |
| 14-17" | 6.5" | +27 to +37 |
Wider still: 14x7.5 +19 to +30; 15x7.5 +19 to +30; 16x7.5 +19 to +30; 17x7.5 +19 to +30 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (57.1 mm), correct-length ball-seat lug bolts).
The 1990-1992 Volkswagen Corrado uses a 4X100 bolt pattern and a 57.1 mm center bore.
Factory sizes: 14x6 +38; 15x6 +35; 16x6.5 +35.
Its wheel fasteners use a M12x1.5 thread.
Bolt-on sizes run from 14" to 17" in diameter; see the size table for the offset range at each width.