Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Volkswagen Fox built from 1987 to 1993 (Base, GL).
Every 1987-1993 Volkswagen Fox uses a 4X100 bolt pattern with a 57.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 57.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Volkswagen Fox (1st Gen) and the model years each was sold. All of them share the 4X100 bolt pattern.
| Submodel | Years |
|---|---|
| Base | 1987-1993 |
| GL | 1987-1993 |
Wheel sizes Volkswagen fitted to the 1987-1993 Volkswagen Fox from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 13x4.5 +35 |
| 14x4.5 +35 |
| 14x5 +40 |
Widths and offsets with Verified Fitment on the 1987-1993 Volkswagen Fox: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 13-15" | 4.5" | +18 to +40 |
| 13-15" | 5" | +24 to +34 |
Wider still: 13x6 +16 to +27; 14x6 +16 to +27; 15x6 +16 to +27 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (57.1 mm), correct-length ball-seat lug bolts).
The 1987-1993 Volkswagen Fox (1st Gen) uses a 4X100 bolt pattern and a 57.1 mm center bore.
Factory sizes: 13x4.5 +35; 14x4.5 +35; 14x5 +40.
Its wheel fasteners use a M12x1.5 thread.
Bolt-on sizes run from 13" to 15" in diameter; see the size table for the offset range at each width.