Volkswagen Golf (Mk7) 2015-2020 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Volkswagen Golf built from 2015 to 2020 (TDI, S, SE, SEL, Wolfsburg Edition, TSI).

Fitment specs

Bolt pattern5X112
Center bore57.1 mm
Lug threadM14x1.5
Model years2015-2020
GenerationMk7

Every 2015-2020 Volkswagen Golf uses a 5X112 bolt pattern with a 57.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 57.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Volkswagen Golf (Mk7) and the model years each was sold. All of them share the 5X112 bolt pattern.

SubmodelYearsFactory wheel sizes
TDI2015See factory sizes below
S2015-201915x6 +43
SE2015-201916x6.5 +46
SEL2015-2017See factory sizes below
Wolfsburg Edition2016-2017See factory sizes below
TSI2020See factory sizes below

Factory wheel sizes

Wheel sizes Volkswagen fitted to the 2015-2020 Volkswagen Golf from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
15x6 +43
16x6.5 +46
16x7 +51
17x6 +48
17x7 +49
18x7.5 +51
19x7.5 +51

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2015-2020 Volkswagen Golf: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

TDI, SEL, Wolfsburg Edition, TSI

DiameterWidthOffset range
15-20"6"+14 to +53
15-20"6.5"+20 to +59
15-20"7"+26 to +63
15-20"7.5"+33 to +56
15-20"8"+39 to +50

Wider still: 15x9 +32 to +43; 16x9 +32 to +43; 17x9 +32 to +43; 18x9 +32 to +43; 19x9 +32 to +43; 20x9 +32 to +43 fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).

S

DiameterWidthOffset range
15-20"6"+14 to +53
15-20"6.5"+20 to +59
15-20"7"+26 to +63
15-20"7.5"+33 to +56
15-20"8"+39 to +50

Wider still: 15x9 +32 to +43; 16x9 +32 to +43; 17x9 +32 to +43; 18x9 +32 to +43; 19x9 +32 to +43; 20x9 +32 to +43 fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).

SE

DiameterWidthOffset range
16-20"6.5"+20 to +56
16-20"7"+26 to +62
16-20"7.5"+33 to +56
16-20"8"+39 to +50

Wider still: 16x9 +32 to +43; 17x9 +32 to +43; 18x9 +32 to +43; 19x9 +32 to +43; 20x9 +32 to +43 fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2015-2020 Volkswagen Golf. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

TDI, SEL, Wolfsburg Edition, TSI

Modifications Required (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install)

S

Modifications Required (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install)

SE

Modifications Required (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install)

FAQ

What is the bolt pattern of the 2015-2020 Volkswagen Golf?

The 2015-2020 Volkswagen Golf (Mk7) uses a 5X112 bolt pattern and a 57.1 mm center bore.

What size wheels came on the 2015-2020 Volkswagen Golf from the factory?

Factory sizes: 15x6 +43; 16x6.5 +46; 16x7 +51; 17x6 +48; 17x7 +49; 18x7.5 +51; 19x7.5 +51.

What lug thread size does the 2015-2020 Volkswagen Golf use?

Its wheel fasteners use a M14x1.5 thread.

What aftermarket wheel sizes fit the 2015-2020 Volkswagen Golf without modifications?

Bolt-on sizes run from 15" to 20" in diameter; see the size table for the offset range at each width.