Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Volkswagen Passat built from 2020 to 2022 (S, SE, R-Line, SEL, Limited Edition).
Every 2020-2022 Volkswagen Passat uses a 5X112 bolt pattern with a 57.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 57.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Volkswagen Passat (NMS) and the model years each was sold. All of them share the 5X112 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| S | 2020-2021 | 17x7 +43 |
| SE | 2020-2021 | 17x7 +43 18x8 +48 |
| R-Line | 2020-2021 | 19x8 +44 |
| SEL | 2020 | 18x8 +48 |
| Limited Edition | 2022 | See factory sizes below |
Wheel sizes Volkswagen fitted to the 2020-2022 Volkswagen Passat from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 17x7 +43 |
| 17x7.5 +45 |
| 18x8 +48 |
| 19x8 +44 |
Widths and offsets with Verified Fitment on the 2020-2022 Volkswagen Passat: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 17-20" | 7" | +21 to +51 |
| 17-20" | 7.5" | +28 to +44 |
| 17-20" | 8" | +34 to +38 |
| Diameter | Width | Offset range |
|---|---|---|
| 19-20" | 8" | +34 to +44 |
Wider still: 19x9 +30 to +31; 20x9 +30 to +31 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (57.1 mm), correct-length ball-seat lug bolts).
| Diameter | Width | Offset range |
|---|---|---|
| 18-20" | 8" | +34 to +48 |
| 18-20" | 8.5" | +40 to +41 |
Wider still: 18x9 +30 to +35; 19x9 +30 to +35; 20x9 +30 to +35 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (57.1 mm), correct-length ball-seat lug bolts).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2020-2022 Volkswagen Passat. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.









Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (57.1 mm), correct-length ball-seat lug bolts)










Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (57.1 mm), correct-length ball-seat lug bolts)


















Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (57.1 mm), correct-length ball-seat lug bolts)












The 2020-2022 Volkswagen Passat (NMS) uses a 5X112 bolt pattern and a 57.1 mm center bore.
Factory sizes: 17x7 +43; 17x7.5 +45; 18x8 +48; 19x8 +44.
Its wheel fasteners use a M14x1.5 thread.
Bolt-on sizes run from 17" to 20" in diameter; see the size table for the offset range at each width.