Volkswagen Vanagon (T3) 1980-1991 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Volkswagen Vanagon built from 1980 to 1991 (GL, Westfalia Camper, Syncro).

Fitment specs

Bolt pattern5X112
Center bore66.6 mm
Lug threadM14x1.5
Model years1980-1991
GenerationT3

Every 1980-1991 Volkswagen Vanagon uses a 5X112 bolt pattern with a 66.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Volkswagen Vanagon (T3) and the model years each was sold. All of them share the 5X112 bolt pattern.

SubmodelYearsFactory wheel sizes
GL1980-1991See factory sizes below
Westfalia Camper1980-1991See factory sizes below
Syncro1986-199114x5.5 +35

Factory wheel sizes

Wheel sizes Volkswagen fitted to the 1980-1991 Volkswagen Vanagon from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
14x5.5 +35
14x5.5 +38
15x6 +33
16x6.5 +31

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 1980-1991 Volkswagen Vanagon: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
14-17"5.5"+18 to +40
14-17"6"+24 to +34

Wider still: 14x7 +16 to +27; 15x7 +16 to +27; 16x7 +16 to +27; 17x7 +16 to +27 fit with modifications (check load rating of replacement wheels, hub-centric rings (66.6 mm), check inner clearance to brakes and suspension, correct-length lug bolts for the wheel seat).

FAQ

What is the bolt pattern of the 1980-1991 Volkswagen Vanagon?

The 1980-1991 Volkswagen Vanagon (T3) uses a 5X112 bolt pattern and a 66.6 mm center bore.

What size wheels came on the 1980-1991 Volkswagen Vanagon from the factory?

Factory sizes: 14x5.5 +35; 14x5.5 +38; 15x6 +33; 16x6.5 +31.

What lug thread size does the 1980-1991 Volkswagen Vanagon use?

Its wheel fasteners use a M14x1.5 thread.

What aftermarket wheel sizes fit the 1980-1991 Volkswagen Vanagon without modifications?

Bolt-on sizes run from 14" to 17" in diameter; see the size table for the offset range at each width.