Acura CL (YA1) 1997-1999 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Acura CL built from 1997 to 1999.

Fitment specs

Bolt pattern4X114.3
Center bore64.1 mm
Lug threadM12x1.5
Model years1997-1999
GenerationYA1

Every 1997-1999 Acura CL uses a 4X114.3 bolt pattern with a 64.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 64.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Acura CL (YA1) and the model years each was sold. All of them share the 4X114.3 bolt pattern.

SubmodelYears
3.0CL1997-1999

Factory wheel sizes

Wheel sizes Acura fitted to the 1997-1999 Acura CL from the factory. Offsets are ET in millimeters.

Factory size
16x6 +50
17x6.5 +50
17x7.5 +50
18x7 +48
18x7 +50
18x8 +48

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 1997-1999 Acura CL: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
15-17"6.5"+33 to +55
15-17"7"+39 to +49

Wider still: 15x8 +31 to +42; 16x8 +31 to +42; 17x8 +31 to +42 fit with modifications (roll rear fender lips, front camber bolts / rear camber arms for -1.5° or more, hub-centric rings for aftermarket wheels).

FAQ

What is the bolt pattern of the 1997-1999 Acura CL?

The 1997-1999 Acura CL (YA1) uses a 4X114.3 bolt pattern and a 64.1 mm center bore.

What size wheels came on the 1997-1999 Acura CL from the factory?

Factory sizes: 16x6 +50; 17x6.5 +50; 17x7.5 +50; 18x7 +48; 18x7 +50; 18x8 +48.

What lug thread size does the 1997-1999 Acura CL use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 1997-1999 Acura CL without modifications?

Bolt-on sizes run from 15" to 17" in diameter; see the size table for the offset range at each width.