Acura CL (YA4) 2001-2003 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Acura CL built from 2001 to 2003 (3.2CL, Type-S).

Fitment specs

Bolt pattern5X114.3
Center bore64.1 mm
Lug threadM12x1.5
Model years2001-2003
GenerationYA4

Every 2001-2003 Acura CL uses a 5X114.3 bolt pattern with a 64.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 64.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Acura CL (YA4) and the model years each was sold. All of them share the 5X114.3 bolt pattern.

SubmodelYears
3.2CL2001-2003
Type-S2001-2003

Factory wheel sizes

Wheel sizes Acura fitted to the 2001-2003 Acura CL from the factory. Offsets are ET in millimeters.

Factory size
16x6.5 +55
17x7 +50
17x7 +55
17x7.5 +50
18x7.5 +50
18x8 +50

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2001-2003 Acura CL: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
16-19"6.5"+38 to +60
16-19"7"+44 to +54

Wider still: 16x8 +36 to +47; 17x8 +36 to +47; 18x8 +36 to +47; 19x8 +36 to +47 fit with modifications (roll rear fender lips, front camber bolts / rear camber arms for -1.5° or more, hub-centric rings for aftermarket wheels).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2001-2003 Acura CL. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

Modifications Required (roll rear fender lips, front camber bolts / rear camber arms for -1.5° or more, hub-centric rings for aftermarket wheels)

FAQ

What is the bolt pattern of the 2001-2003 Acura CL?

The 2001-2003 Acura CL (YA4) uses a 5X114.3 bolt pattern and a 64.1 mm center bore.

What size wheels came on the 2001-2003 Acura CL from the factory?

Factory sizes: 16x6.5 +55; 17x7 +50; 17x7 +55; 17x7.5 +50; 18x7.5 +50; 18x8 +50.

What lug thread size does the 2001-2003 Acura CL use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 2001-2003 Acura CL without modifications?

Bolt-on sizes run from 16" to 19" in diameter; see the size table for the offset range at each width.