Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Acura RL built from 1996 to 1998.
Every 1996-1998 Acura RL uses a 5X114.3 bolt pattern with a 64.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 64.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Acura RL (KA9) and the model years each was sold. All of them share the 5X114.3 bolt pattern.
| Submodel | Years |
|---|---|
| 3.5RL | 1996-1998 |
Wheel sizes Acura fitted to the 1996-1998 Acura RL from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 16x6.5 +55 |
| 16x7 +55 |
| 17x7.5 +50 |
| 18x8 +45 |
Widths and offsets with Verified Fitment on the 1996-1998 Acura RL: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 16-18" | 6.5" | +48 to +70 |
| 16-18" | 7" | +54 to +64 |
Wider still: 16x8 +46 to +57; 17x8 +46 to +57; 18x8 +46 to +57 fit with modifications (roll rear fender lips, front camber bolts / rear camber arms for -1.5° or more, hub-centric rings for aftermarket wheels).
The 1996-1998 Acura RL (KA9) uses a 5X114.3 bolt pattern and a 64.1 mm center bore.
Factory sizes: 16x6.5 +55; 16x7 +55; 17x7.5 +50; 18x8 +45.
Its wheel fasteners use a M12x1.5 thread.
Bolt-on sizes run from 16" to 18" in diameter; see the size table for the offset range at each width.