Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Acura RL built from 2005 to 2008 (Base, Technology).
Every 2005-2008 Acura RL uses a 5X120 bolt pattern with a 64.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 64.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Acura RL (KB1) and the model years each was sold. All of them share the 5X120 bolt pattern.
| Submodel | Years |
|---|---|
| Base | 2005-2008 |
| Technology | 2005-2008 |
Wheel sizes Acura fitted to the 2005-2008 Acura RL from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 17x8 +55 |
| 18x8 +55 |
| 19x8.5 +50 |
| 19x9 +45 |
Widths and offsets with Verified Fitment on the 2005-2008 Acura RL: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 17-20" | 8" | +38 to +60 |
| 17-20" | 8.5" | +44 to +54 |
Wider still: 17x9.5 +36 to +47; 18x9.5 +36 to +47; 19x9.5 +36 to +47; 20x9.5 +36 to +47 fit with modifications (roll rear fender lips, front camber bolts / rear camber arms for -1.5° or more, hub-centric rings for aftermarket wheels).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2005-2008 Acura RL. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.
Modifications Required (roll rear fender lips, front camber bolts / rear camber arms for -1.5° or more, hub-centric rings for aftermarket wheels)












The 2005-2008 Acura RL (KB1) uses a 5X120 bolt pattern and a 64.1 mm center bore.
Factory sizes: 17x8 +55; 18x8 +55; 19x8.5 +50; 19x9 +45.
Its wheel fasteners use a M14x1.5 thread.
Bolt-on sizes run from 17" to 20" in diameter; see the size table for the offset range at each width.