Acura SLX (UBS) 1996-1997 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Acura SLX built from 1996 to 1997.

Fitment specs

Bolt pattern6X139.7
Center bore100.1 mm
Lug threadM12x1.5
Model years1996-1997
GenerationUBS

Every 1996-1997 Acura SLX uses a 6X139.7 bolt pattern with a 100.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 100.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Acura SLX (UBS) and the model years each was sold. All of them share the 6X139.7 bolt pattern.

SubmodelYears
Base1996-1997

Factory wheel sizes

Wheel sizes Acura fitted to the 1996-1997 Acura SLX from the factory. Offsets are ET in millimeters.

Factory size
16x7 +38
17x7.5 +35
17x7.5 +38
18x8 +35

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 1996-1997 Acura SLX: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
16-18"7"+21 to +44
16-18"7.5"+27 to +37

Wider still: 16x8.5 +19 to +30; 17x8.5 +19 to +30; 18x8.5 +19 to +30 fit with modifications (trim front bumper cover / inner fender liner at full lock, roll rear fender lips, hub-centric rings for aftermarket wheels).

FAQ

What is the bolt pattern of the 1996-1997 Acura SLX?

The 1996-1997 Acura SLX (UBS) uses a 6X139.7 bolt pattern and a 100.1 mm center bore.

What size wheels came on the 1996-1997 Acura SLX from the factory?

Factory sizes: 16x7 +38; 17x7.5 +35; 17x7.5 +38; 18x8 +35.

What lug thread size does the 1996-1997 Acura SLX use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 1996-1997 Acura SLX without modifications?

Bolt-on sizes run from 16" to 18" in diameter; see the size table for the offset range at each width.