Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Acura SLX built from 1998 to 1999.
Every 1998-1999 Acura SLX uses a 6X139.7 bolt pattern with a 100.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 100.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Acura SLX (UBS) and the model years each was sold. All of them share the 6X139.7 bolt pattern.
| Submodel | Years |
|---|---|
| Base | 1998-1999 |
Wheel sizes Acura fitted to the 1998-1999 Acura SLX from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 16x7 +38 |
| 17x7.5 +35 |
| 17x7.5 +38 |
| 18x8 +35 |
Widths and offsets with Verified Fitment on the 1998-1999 Acura SLX: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 16-18" | 7" | +21 to +44 |
| 16-18" | 7.5" | +27 to +37 |
Wider still: 16x8.5 +19 to +30; 17x8.5 +19 to +30; 18x8.5 +19 to +30 fit with modifications (trim front bumper cover / inner fender liner at full lock, roll rear fender lips, hub-centric rings for aftermarket wheels).
The 1998-1999 Acura SLX (UBS) uses a 6X139.7 bolt pattern and a 100.1 mm center bore.
Factory sizes: 16x7 +38; 17x7.5 +35; 17x7.5 +38; 18x8 +35.
Its wheel fasteners use a M12x1.5 thread.
Bolt-on sizes run from 16" to 18" in diameter; see the size table for the offset range at each width.