Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Acura ZDX built from 2024 to 2025 (A-Spec, Type S).
Every 2024-2025 Acura ZDX uses a 6X132 bolt pattern with a 74.5 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 74.5 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Acura ZDX (2nd Gen) and the model years each was sold. All of them share the 6X132 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| A-Spec | 2024-2025 | 20x9 +40 |
| Type S | 2024-2025 | 22x9.5 +40 |
Wheel sizes Acura fitted to the 2024-2025 Acura ZDX from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 20x9 +40 |
| 21x9.5 +40 |
| 22x9.5 +40 |
Widths and offsets with Verified Fitment on the 2024-2025 Acura ZDX: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 20-22" | 9" | +23 to +46 |
| 20-22" | 9.5" | +29 to +39 |
Wider still: 20x10.5 +21 to +32; 21x10.5 +21 to +32; 22x10.5 +21 to +32 fit with modifications (trim front bumper cover / inner fender liner at full lock, roll rear fender lips, hub-centric rings for aftermarket wheels).
| Diameter | Width | Offset range |
|---|---|---|
| 22" | 9.5" | +29 to +39 |
Wider still: 22x10.5 +21 to +32 fit with modifications (trim front bumper cover / inner fender liner at full lock, roll rear fender lips, hub-centric rings for aftermarket wheels).
The 2024-2025 Acura ZDX (2nd Gen) uses a 6X132 bolt pattern and a 74.5 mm center bore.
Factory sizes: 20x9 +40; 21x9.5 +40; 22x9.5 +40.
Its wheel fasteners use a M14x1.5 thread.
Bolt-on sizes run from 20" to 22" in diameter; see the size table for the offset range at each width.