Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Audi A8 built from 2004 to 2010 (L, L W12, Base, L Sport Package, Sport Package).
Every 2004-2010 Audi A8 uses a 5X112 bolt pattern with a 57.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 57.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Audi A8 (D3) and the model years each was sold. All of them share the 5X112 bolt pattern.
| Submodel | Years |
|---|---|
| L | 2004-2010 |
| L W12 | 2005-2009 |
| Base | 2005-2010 |
| L Sport Package | 2007-2010 |
| Sport Package | 2007-2010 |
Wheel sizes Audi fitted to the 2004-2010 Audi A8 from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 18x8.5 +45 |
| 19x8.5 +45 |
| 20x8.5 +43 |
Widths and offsets with Verified Fitment on the 2004-2010 Audi A8: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 18-21" | 8.5" | +28 to +50 |
| 18-21" | 9" | +34 to +44 |
Wider still: 18x10 +26 to +37; 19x10 +26 to +37; 20x10 +26 to +37; 21x10 +26 to +37 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (57.1 mm), correct-length ball-seat lug bolts).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2004-2010 Audi A8. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.












Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (57.1 mm), correct-length ball-seat lug bolts)












The 2004-2010 Audi A8 (D3) uses a 5X112 bolt pattern and a 57.1 mm center bore.
Factory sizes: 18x8.5 +45; 19x8.5 +45; 20x8.5 +43.
Its wheel fasteners use a M14x1.5 thread.
Bolt-on sizes run from 18" to 21" in diameter; see the size table for the offset range at each width.