Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Audi A8 built from 2019 to 2026.
Every 2019-2026 Audi A8 uses a 5X112 bolt pattern with a 66.5 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.5 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Audi A8 (D5) and the model years each was sold. All of them share the 5X112 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| L 55 TFSI quattro | 2019-2026 | 18x8 +29 19x8 +32 19x9 +34 20x9 +37 20x9 +40 21x9 +37 |
Wheel sizes Audi fitted to the 2019-2026 Audi A8 from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 17x8 +29 |
| 18x8 +29 |
| 19x8 +32 |
| 19x9 +34 |
| 20x9 +37 |
| 20x9 +40 |
| 21x9 +37 |
Widths and offsets with Verified Fitment on the 2019-2026 Audi A8: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 18-22" | 8" | +4 to +39 |
| 18-22" | 8.5" | +11 to +45 |
| 18-22" | 9" | +17 to +42 |
| 18-22" | 9.5" | +23 to +36 |
| 18-22" | 10" | +30 |
Wider still: 18x10.5 +15 to +29; 18x11 +21 to +23; 19x10.5 +15 to +29; 19x11 +21 to +23; 20x10.5 +15 to +29; 20x11 +21 to +23… fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.5 mm), correct-length ball-seat lug bolts).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2019-2026 Audi A8. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.












Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.5 mm), correct-length ball-seat lug bolts)










The 2019-2026 Audi A8 (D5) uses a 5X112 bolt pattern and a 66.5 mm center bore.
Factory sizes: 17x8 +29; 18x8 +29; 19x8 +32; 19x9 +34; 20x9 +37; 20x9 +40; 21x9 +37.
Its wheel fasteners use a M14x1.5 thread.
Bolt-on sizes run from 18" to 22" in diameter; see the size table for the offset range at each width.