Audi RS7 (C7) 2014-2018 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Audi RS7 built from 2014 to 2018.

Fitment specs

Bolt pattern5X112
Center bore66.5 mm
Lug threadM14x1.5
Model years2014-2018
GenerationC7

Every 2014-2018 Audi RS7 uses a 5X112 bolt pattern with a 66.5 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.5 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Audi RS7 (C7) and the model years each was sold. All of them share the 5X112 bolt pattern.

SubmodelYears
Base2014-2018

Factory wheel sizes

Wheel sizes Audi fitted to the 2014-2018 Audi RS7 from the factory. Offsets are ET in millimeters.

Factory size
20x9 +35
21x9 +35

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2014-2018 Audi RS7: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
20-22"9"+18 to +40
20-22"9.5"+24 to +34

Wider still: 20x10.5 +16 to +27; 21x10.5 +16 to +27; 22x10.5 +16 to +27 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.5 mm), correct-length ball-seat lug bolts).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2014-2018 Audi RS7. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.5 mm), correct-length ball-seat lug bolts)

FAQ

What is the bolt pattern of the 2014-2018 Audi RS7?

The 2014-2018 Audi RS7 (C7) uses a 5X112 bolt pattern and a 66.5 mm center bore.

What size wheels came on the 2014-2018 Audi RS7 from the factory?

Factory sizes: 20x9 +35; 21x9 +35.

What lug thread size does the 2014-2018 Audi RS7 use?

Its wheel fasteners use a M14x1.5 thread.

What aftermarket wheel sizes fit the 2014-2018 Audi RS7 without modifications?

Bolt-on sizes run from 20" to 22" in diameter; see the size table for the offset range at each width.