Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Audi RS7 built from 2021 to 2026 (Base, Ceramic Brakes).
Every 2021-2026 Audi RS7 uses a 5X112 bolt pattern with a 66.5 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.5 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Audi RS7 (C8) and the model years each was sold. All of them share the 5X112 bolt pattern.
| Submodel | Years |
|---|---|
| Base | 2021-2026 |
| Ceramic Brakes | 2021-2026 |
Wheel sizes Audi fitted to the 2021-2026 Audi RS7 from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 21x8.5 +19 |
| 21x10.5 +19 |
| 22x10.5 +19 |
Widths and offsets with Verified Fitment on the 2021-2026 Audi RS7: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 21-23" | 10.5" | +2 to +24 |
| 21-23" | 11" | +8 to +18 |
Wider still: 21x12 +0 to +11; 22x12 +0 to +11; 23x12 +0 to +11 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.5 mm), correct-length ball-seat lug bolts).
The 2021-2026 Audi RS7 (C8) uses a 5X112 bolt pattern and a 66.5 mm center bore.
Factory sizes: 21x8.5 +19; 21x10.5 +19; 22x10.5 +19.
Its wheel fasteners use a M14x1.5 thread.
Bolt-on sizes run from 21" to 23" in diameter; see the size table for the offset range at each width.