Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Audi S4 built from 1992 to 1994.
Every 1992-1994 Audi S4 uses a 5X112 bolt pattern with a 57.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 57.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Audi S4 (C4) and the model years each was sold. All of them share the 5X112 bolt pattern.
| Submodel | Years |
|---|---|
| Sedan | 1992-1994 |
Wheel sizes Audi fitted to the 1992-1994 Audi S4 from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 15x7 +45 |
| 15x7.5 +40 |
| 16x8 +40 |
| 17x8 +40 |
Widths and offsets with Verified Fitment on the 1992-1994 Audi S4: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 15-18" | 7.5" | +23 to +45 |
| 15-18" | 8" | +29 to +39 |
Wider still: 15x9 +21 to +32; 16x9 +21 to +32; 17x9 +21 to +32; 18x9 +21 to +32 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (57.1 mm), correct-length ball-seat lug bolts).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 1992-1994 Audi S4. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.









Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (57.1 mm), correct-length ball-seat lug bolts)








The 1992-1994 Audi S4 (C4) uses a 5X112 bolt pattern and a 57.1 mm center bore.
Factory sizes: 15x7 +45; 15x7.5 +40; 16x8 +40; 17x8 +40.
Its wheel fasteners use a M14x1.5 thread.
Bolt-on sizes run from 15" to 18" in diameter; see the size table for the offset range at each width.