Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Audi S6 built from 2020 to 2025.
Every 2020-2025 Audi S6 uses a 5X112 bolt pattern with a 66.5 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.5 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Audi S6 (C8) and the model years each was sold. All of them share the 5X112 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| Base | 2020-2025 | 19x8 +39 20x8.5 +43 21x8.5 +43 |
Wheel sizes Audi fitted to the 2020-2025 Audi S6 from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 19x8 +39 |
| 20x8.5 +43 |
| 21x8.5 +43 |
Widths and offsets with Verified Fitment on the 2020-2025 Audi S6: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 19-22" | 8.5" | +23 to +45 |
| 19-22" | 9" | +29 to +39 |
Wider still: 19x10 +21 to +32; 20x10 +21 to +32; 21x10 +21 to +32; 22x10 +21 to +32 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.5 mm), correct-length ball-seat lug bolts).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2020-2025 Audi S6. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.












Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.5 mm), correct-length ball-seat lug bolts)








The 2020-2025 Audi S6 (C8) uses a 5X112 bolt pattern and a 66.5 mm center bore.
Factory sizes: 19x8 +39; 20x8.5 +43; 21x8.5 +43.
Its wheel fasteners use a M14x1.5 thread.
Bolt-on sizes run from 19" to 22" in diameter; see the size table for the offset range at each width.