Audi TT (8S) 2016-2023 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Audi TT built from 2016 to 2023 (Coupe, Roadster).

Fitment specs

Bolt pattern5X112
Center bore57.1 mm
Lug threadM14x1.5
Model years2016-2023
Generation8S

Every 2016-2023 Audi TT uses a 5X112 bolt pattern with a 57.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 57.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Audi TT (8S) and the model years each was sold. All of them share the 5X112 bolt pattern.

SubmodelYears
Coupe2016-2023
Roadster2016-2023

Factory wheel sizes

Wheel sizes Audi fitted to the 2016-2023 Audi TT from the factory. Offsets are ET in millimeters.

Factory size
17x7 +47
17x8 +47
17x8.5 +50
18x8.5 +50
19x9 +52
20x9 +42

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2016-2023 Audi TT: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
18-20"8.5"+33 to +55
18-20"9"+39 to +49

Wider still: 18x10 +31 to +42; 19x10 +31 to +42; 20x10 +31 to +42 fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2016-2023 Audi TT. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

Modifications Required (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install)

FAQ

What is the bolt pattern of the 2016-2023 Audi TT?

The 2016-2023 Audi TT (8S) uses a 5X112 bolt pattern and a 57.1 mm center bore.

What size wheels came on the 2016-2023 Audi TT from the factory?

Factory sizes: 17x7 +47; 17x8 +47; 17x8.5 +50; 18x8.5 +50; 19x9 +52; 20x9 +42.

What lug thread size does the 2016-2023 Audi TT use?

Its wheel fasteners use a M14x1.5 thread.

What aftermarket wheel sizes fit the 2016-2023 Audi TT without modifications?

Bolt-on sizes run from 18" to 20" in diameter; see the size table for the offset range at each width.