Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the BMW 2 Series built from 2022 to 2026 (228i Gran Coupe, 228i xDrive Gran Coupe, M235i xDrive Gran Coupe, 228 xDrive Gran Coupe, M235 xDrive Gran Coupe).
Every 2022-2026 BMW 2 Series uses a 5X112 bolt pattern with a 66.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.25. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the BMW 2 Series (G42) and the model years each was sold. All of them share the 5X112 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| 228i Gran Coupe | 2022-2024 | See factory sizes below |
| 228i xDrive Gran Coupe | 2022-2024 | See factory sizes below |
| M235i xDrive Gran Coupe | 2022-2024 | See factory sizes below |
| 228 xDrive Gran Coupe | 2025-2026 | 17x6.5 +45 17x7.5 +53 18x6.5 +42 18x8 +54 19x6.5 +42 19x8 +53 |
| M235 xDrive Gran Coupe | 2025-2026 | 18x6.5 +42 18x8 +54 19x6.5 +42 19x8 +53 |
Wheel sizes BMW fitted to the 2022-2026 BMW 2 Series from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 17x7.5 +30 |
| 18x7.5 +25 |
| 18x7.5 +25 front / 18x8.5 +40 rear |
| 19x8 +27 |
| 19x8 +27 front / 19x8.5 +40 rear |
| 19x8.5 +40 |
| 19x8.5 +25 front / 19x9.5 +35 rear |
| 20x8 +27 front / 20x8.5 +40 rear |
| 20x8.5 +40 |
Widths and offsets with Verified Fitment on the 2022-2026 BMW 2 Series: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 17-20" | 7.5" | +4 to +40 |
| 17-20" | 8" | +10 to +46 |
| 17-20" | 8.5" | +16 to +45 |
| 17-20" | 9" | +23 to +39 |
| 17-20" | 9.5" | +29 to +33 |
Wider still: 17x10 +15 to +32; 17x10.5 +21 to +26; 18x10 +15 to +32; 18x10.5 +21 to +26; 19x10 +15 to +32; 19x10.5 +21 to +26… fit with modifications (roll rear fender lips, front camber plates / offset top mounts, hub-centric rings (66.6 mm)).
| Diameter | Width | Offset range |
|---|---|---|
| 17-20" | 8" | +10 to +54 |
| 17-20" | 8.5" | +16 to +47 |
| 17-20" | 9" | +23 to +41 |
| 17-20" | 9.5" | +29 to +34 |
Wider still: 17x10 +15 to +32; 17x10.5 +21 to +26; 18x10 +15 to +32; 18x10.5 +21 to +26; 19x10 +15 to +32; 19x10.5 +21 to +26… fit with modifications (roll rear fender lips, front camber plates / offset top mounts, hub-centric rings (66.6 mm)).
| Diameter | Width | Offset range |
|---|---|---|
| 18-20" | 8" | +10 to +54 |
| 18-20" | 8.5" | +16 to +47 |
| 18-20" | 9" | +23 to +41 |
| 18-20" | 9.5" | +29 to +34 |
Wider still: 18x10 +15 to +32; 18x10.5 +21 to +26; 19x10 +15 to +32; 19x10.5 +21 to +26; 20x10 +15 to +32; 20x10.5 +21 to +26 fit with modifications (roll rear fender lips, front camber plates / offset top mounts, hub-centric rings (66.6 mm)).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2022-2026 BMW 2 Series. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.












Modifications Required (roll rear fender lips, front camber plates / offset top mounts, hub-centric rings (66.6 mm))



















Modifications Required (roll rear fender lips, front camber plates / offset top mounts, hub-centric rings (66.6 mm))



















Modifications Required (roll rear fender lips, front camber plates / offset top mounts, hub-centric rings (66.6 mm))







The 2022-2026 BMW 2 Series (G42) uses a 5X112 bolt pattern and a 66.6 mm center bore.
Factory sizes: 17x7.5 +30; 18x7.5 +25; 18x7.5 +25 front / 18x8.5 +40 rear; 19x8 +27; 19x8 +27 front / 19x8.5 +40 rear; 19x8.5 +40; 19x8.5 +25 front / 19x9.5 +35 rear; 20x8 +27 front / 20x8.5 +40 rear; 20x8.5 +40.
Its wheel fasteners use a M14x1.25 thread.
Bolt-on sizes run from 17" to 20" in diameter; see the size table for the offset range at each width.