Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the BMW 2 Series built from 2014 to 2021 (228i, 228i xDrive, 230i, 230i xDrive, M235i, M235i xDrive, M240i, M240i xDrive).
Every 2014-2021 BMW 2 Series uses a 5X120 bolt pattern with a 72.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 72.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.25. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the BMW 2 Series (F22/F23) and the model years each was sold. All of them share the 5X120 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| 228i | 2014-2016 | 17x7 +40 17x7.5 +43 17x7.5 +43 front / 17x8 +53 rear 18x7.5 +45 18x7.5 +45 front / 18x8 +52 rear 19x7.5 +45 front / 19x8 +52 rear |
| 228i xDrive | 2015-2016 | 17x7 +40 17x7.5 +43 17x7.5 +43 front / 17x8 +53 rear 18x7.5 +45 18x7.5 +45 front / 18x8 +52 rear 19x7.5 +45 front / 19x8 +52 rear |
| 230i | 2017-2021 | 17x7 +40 17x7.5 +43 17x7.5 +43 front / 17x8 +53 rear 18x7.5 +45 18x7.5 +45 front / 18x8 +52 rear 19x7.5 +45 front / 19x8 +52 rear |
| 230i xDrive | 2017-2021 | 17x7 +40 17x7.5 +43 17x7.5 +43 front / 17x8 +53 rear 18x7.5 +45 18x7.5 +45 front / 18x8 +52 rear 19x7.5 +45 front / 19x8 +52 rear |
| M235i | 2014-2016 | 17x7 +40 17x7.5 +43 18x7.5 +45 18x7.5 +45 front / 18x8 +52 rear 18x8 +52 19x7.5 +45 front / 19x8 +52 rear 19x8 +52 |
| M235i xDrive | 2015-2016 | 17x7 +40 17x7.5 +43 18x7.5 +45 18x8 +52 19x8 +52 |
| M240i | 2017-2021 | 17x7 +40 17x7.5 +43 18x7.5 +45 18x8 +52 19x8 +52 |
| M240i xDrive | 2017-2021 | 17x7 +40 17x7.5 +43 18x7.5 +45 18x8 +52 19x8 +52 |
Wheel sizes BMW fitted to the 2014-2021 BMW 2 Series from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 17x7 +40 |
| 17x7.5 +43 |
| 17x7.5 +43 front / 17x8 +53 rear |
| 18x7.5 +45 |
| 18x7.5 +45 front / 18x8 +52 rear |
| 18x8 +52 |
| 19x7.5 +45 front / 19x8 +52 rear |
| 19x8 +52 |
Widths and offsets with Verified Fitment on the 2014-2021 BMW 2 Series: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 17-19" | 7" | +19 to +50 | +21 to +50 |
| 17-19" | 7.5" | +26 to +56 | +28 to +56 |
| 17-19" | 8" | +32 to +57 | +34 to +58 |
| 17-19" | 8.5" | +39 to +51 | +40 to +52 |
| 17-19" | 9" | +45 | — |
Wider still: 17x9.5 front +31 to +44 / rear +33 to +45; 17x10 front +37 to +38 / rear —; 18x9.5 front +31 to +44 / rear +33 to +45; 18x10 front +37 to +38 / rear —; 19x9.5 front +31 to +44 / rear +33 to +45; 19x10 front +37 to +38 / rear — fit with modifications (roll rear fender lips, adjustable rear camber arms for -1.5° or more, front camber plates, hub-centric rings if wheel bore is larger than the hub).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2014-2021 BMW 2 Series. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.



Modifications Required (roll rear fender lips, adjustable rear camber arms for -1.5° or more, front camber plates, hub-centric rings if wheel bore is larger than the hub)












The 2014-2021 BMW 2 Series (F22/F23) uses a 5X120 bolt pattern and a 72.6 mm center bore.
Factory sizes: 17x7 +40; 17x7.5 +43; 17x7.5 +43 front / 17x8 +53 rear; 18x7.5 +45; 18x7.5 +45 front / 18x8 +52 rear; 18x8 +52; 19x7.5 +45 front / 19x8 +52 rear; 19x8 +52.
Its wheel fasteners use a M14x1.25 thread.
Bolt-on sizes run from 17" to 19" in diameter; see the size table for the offset range at each width.