Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the BMW 6 Series built from 2004 to 2010 (645Ci, 650i, M6).
Every 2004-2010 BMW 6 Series uses a 5X120 bolt pattern with a 72.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 72.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the BMW 6 Series (E63/E64) and the model years each was sold. All of them share the 5X120 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| 645Ci | 2004-2005 | 17x7.5 +14 18x8 +14 18x8 +14 front / 18x9 +18 rear 19x8.5 +14 front / 19x9 +18 rear 20x8.5 +14 front / 20x9.5 +20 rear |
| 650i | 2006-2010 | 17x7.5 +14 18x8 +14 18x8 +14 front / 18x9 +14 rear 18x8 +14 front / 18x9 +18 rear 19x8.5 +14 front / 19x9 +14 rear 19x8.5 +14 front / 19x9 +18 rear 20x8.5 +14 front / 20x9.5 +20 rear |
| M6 | 2006-2010 | 19x8.5 +14 front / 19x9 +14 rear 19x8.5 +14 front / 19x9 +18 rear |
Wheel sizes BMW fitted to the 2004-2010 BMW 6 Series from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 17x7.5 +14 |
| 18x8 +14 |
| 18x8 +14 front / 18x9 +14 rear |
| 18x8 +14 front / 18x9 +18 rear |
| 19x8.5 +14 front / 19x9 +14 rear |
| 19x8.5 +14 front / 19x9 +18 rear |
| 20x8.5 +14 front / 20x9.5 +20 rear |
Widths and offsets with Verified Fitment on the 2004-2010 BMW 6 Series: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 17-20" | 7.5" | -10 to +24 | — |
| 17-20" | 8" | -3 to +20 | -12 to +30 |
| 17-20" | 8.5" | +3 to +13 | -6 to +30 |
| 17-20" | 9" | — | +1 to +24 |
| 17-20" | 9.5" | — | +7 to +17 |
Wider still: 17x10.5 front — / rear -1 to +10; 18x10.5 front — / rear -1 to +10; 19x10.5 front — / rear -1 to +10; 20x10.5 front — / rear -1 to +10 fit with modifications (roll rear fender lips, adjustable rear camber arms for -1.5° or more, front camber plates, hub-centric rings if wheel bore is larger than the hub).
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 19-20" | 8.5" | +3 to +14 | — |
| 19-20" | 9" | — | +1 to +24 |
| 19-20" | 9.5" | — | +7 to +17 |
Wider still: 19x10.5 front — / rear -1 to +10; 20x10.5 front — / rear -1 to +10 fit with modifications (roll rear fender lips, adjustable rear camber arms for -1.5° or more, front camber plates, hub-centric rings if wheel bore is larger than the hub).
The 2004-2010 BMW 6 Series (E63/E64) uses a 5X120 bolt pattern and a 72.6 mm center bore.
Factory sizes: 17x7.5 +14; 18x8 +14; 18x8 +14 front / 18x9 +14 rear; 18x8 +14 front / 18x9 +18 rear; 19x8.5 +14 front / 19x9 +14 rear; 19x8.5 +14 front / 19x9 +18 rear; 20x8.5 +14 front / 20x9.5 +20 rear.
Its wheel fasteners use a M12x1.5 thread.
Bolt-on sizes run from 17" to 20" in diameter; see the size table for the offset range at each width.