BMW 6 Series (F06/F12/F13) 2012-2019 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the BMW 6 Series built from 2012 to 2019 (640i, 640i xDrive, 650i, 650i xDrive, M6, 640i Gran Coupe, 640i xDrive Gran Coupe, 640i xDrive Gran Turismo, 650i Gran Coupe, 650i xDrive Gran Coupe).

Fitment specs

Bolt pattern5X120
Center bore72.6 mm
Lug threadM14x1.25
Model years2012-2019
GenerationF06/F12/F13

Every 2012-2019 BMW 6 Series uses a 5X120 bolt pattern with a 72.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 72.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.25. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the BMW 6 Series (F06/F12/F13) and the model years each was sold. All of them share the 5X120 bolt pattern.

SubmodelYearsFactory wheel sizes
640i2012-201818x8 +30
18x8 +30 front / 18x9 +44 rear
19x8.5 +33
19x8.5 +33 front / 19x9 +44 rear
20x8.5 +33 front / 20x9 +44 rear
640i xDrive2014-201818x8 +30
18x8 +30 front / 18x9 +44 rear
19x8.5 +33
19x8.5 +33 front / 19x9 +44 rear
20x8.5 +33 front / 20x9 +44 rear
650i2012-201818x8 +30
18x8 +30 front / 18x9 +44 rear
18x9 +44
19x8.5 +33
19x8.5 +33 front / 19x9 +44 rear
19x9 +44
20x8.5 +33 front / 20x9 +44 rear
20x9 +44
650i xDrive2013-201818x8 +30
18x9 +44
19x8.5 +33
19x9 +44
20x9 +44
M62012-201819x8.5 +33
19x8.5 +33 front / 19x9 +44 rear
19x9 +44
20x8.5 +33 front / 20x9 +44 rear
20x9 +44
640i Gran Coupe2019See factory sizes below
640i xDrive Gran Coupe2019See factory sizes below
640i xDrive Gran Turismo2019See factory sizes below
650i Gran Coupe2019See factory sizes below
650i xDrive Gran Coupe2019See factory sizes below

Factory wheel sizes

Wheel sizes BMW fitted to the 2012-2019 BMW 6 Series from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
17x8 +30
18x8 +30
18x8 +30 front / 18x9 +44 rear
18x9 +44
19x8.5 +33
19x8.5 +33 front / 19x9 +44 rear
19x9 +44
20x8.5 +33 front / 20x9 +44 rear
20x9 +44

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2012-2019 BMW 6 Series: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

640i, 640i xDrive, 650i, 650i xDrive, 640i Gran Coupe, 640i xDrive Gran Coupe, 640i xDrive Gran Turismo, 650i Gran Coupe, 650i xDrive Gran Coupe

DiameterWidthFront offsetRear offset
18-20"8"+9 to +40+9 to +40
18-20"8.5"+16 to +46+15 to +46
18-20"9"+22 to +49+21 to +49
18-20"9.5"+29 to +43+28 to +43
18-20"10"+35 to +37+34 to +37

Wider still: 18x10.5 front +21 to +36 / rear +21 to +36; 18x11 front +27 to +30 / rear +27 to +30; 19x10.5 front +21 to +36 / rear +21 to +36; 19x11 front +27 to +30 / rear +27 to +30; 20x10.5 front +21 to +36 / rear +21 to +36; 20x11 front +27 to +30 / rear +27 to +30 fit with modifications (roll rear fender lips, adjustable rear camber arms for -1.5° or more, front camber plates, hub-centric rings if wheel bore is larger than the hub).

M6

DiameterWidthFront offsetRear offset
19-20"8.5"+16 to +43+15 to +43
19-20"9"+22 to +49+21 to +49
19-20"9.5"+29 to +43+28 to +43
19-20"10"+35 to +37+34 to +37

Wider still: 19x10.5 front +21 to +36 / rear +21 to +36; 19x11 front +27 to +30 / rear +27 to +30; 20x10.5 front +21 to +36 / rear +21 to +36; 20x11 front +27 to +30 / rear +27 to +30 fit with modifications (roll rear fender lips, adjustable rear camber arms for -1.5° or more, front camber plates, hub-centric rings if wheel bore is larger than the hub).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2012-2019 BMW 6 Series. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

640i, 640i xDrive, 650i, 650i xDrive, 640i Gran Coupe, 640i xDrive Gran Coupe, 640i xDrive Gran Turismo, 650i Gran Coupe, 650i xDrive Gran Coupe

Modifications Required (roll rear fender lips, adjustable rear camber arms for -1.5° or more, front camber plates, hub-centric rings if wheel bore is larger than the hub)

M6

Modifications Required (roll rear fender lips, adjustable rear camber arms for -1.5° or more, front camber plates, hub-centric rings if wheel bore is larger than the hub)

FAQ

What is the bolt pattern of the 2012-2019 BMW 6 Series?

The 2012-2019 BMW 6 Series (F06/F12/F13) uses a 5X120 bolt pattern and a 72.6 mm center bore.

What size wheels came on the 2012-2019 BMW 6 Series from the factory?

Factory sizes: 17x8 +30; 18x8 +30; 18x8 +30 front / 18x9 +44 rear; 18x9 +44; 19x8.5 +33; 19x8.5 +33 front / 19x9 +44 rear; 19x9 +44; 20x8.5 +33 front / 20x9 +44 rear; 20x9 +44.

What lug thread size does the 2012-2019 BMW 6 Series use?

Its wheel fasteners use a M14x1.25 thread.

What aftermarket wheel sizes fit the 2012-2019 BMW 6 Series without modifications?

Bolt-on sizes run from 18" to 20" in diameter; see the size table for the offset range at each width.