Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the BMW 8 Series built from 2019 to 2026 (M850i xDrive Convertible, M850i xDrive Coupe, 840i Convertible, 840i Convertible M Sport, 840i Coupe, 840i Coupe M Sport, 840i Gran Coupe, 840i Gran Coupe M Sport, M850i xDrive Gran Coupe).
Every 2019-2026 BMW 8 Series uses a 5X112 bolt pattern with a 66.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.25. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the BMW 8 Series (G14/G15/G16) and the model years each was sold. All of them share the 5X112 bolt pattern.
| Submodel | Years |
|---|---|
| M850i xDrive Convertible | 2019-2026 |
| M850i xDrive Coupe | 2019-2026 |
| 840i Convertible | 2020-2026 |
| 840i Convertible M Sport | 2020-2022 |
| 840i Coupe | 2020-2026 |
| 840i Coupe M Sport | 2020-2022 |
| 840i Gran Coupe | 2020-2026 |
| 840i Gran Coupe M Sport | 2020-2022 |
| M850i xDrive Gran Coupe | 2020-2026 |
Wheel sizes BMW fitted to the 2019-2026 BMW 8 Series from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 18x8 +30 |
| 18x8 +30 front / 18x9 +41 rear |
| 19x8 +30 |
| 19x8 +26 front / 19x9 +41 rear |
| 19x9 +41 |
| 20x8 +26 front / 20x9 +41 rear |
| 20x9 +41 |
Widths and offsets with Verified Fitment on the 2019-2026 BMW 8 Series: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 18-21" | 8" | +9 to +40 | — |
| 18-21" | 8.5" | +15 to +46 | — |
| 18-21" | 9" | +22 to +46 | +24 to +46 |
| 18-21" | 9.5" | +28 to +40 | +30 to +40 |
| 18-21" | 10" | +34 | — |
Wider still: 18x10.5 front +20 to +33 / rear +22 to +33; 18x11 front +26 to +27 / rear —; 19x10.5 front +20 to +33 / rear +22 to +33; 19x11 front +26 to +27 / rear —; 20x10.5 front +20 to +33 / rear +22 to +33; 20x11 front +26 to +27 / rear —… fit with modifications (roll rear fender lips, adjustable rear camber arms for -1.5° or more, front camber plates, hub-centric rings if wheel bore is larger than the hub).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2019-2026 BMW 8 Series. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.












Modifications Required (roll rear fender lips, adjustable rear camber arms for -1.5° or more, front camber plates, hub-centric rings if wheel bore is larger than the hub)












The 2019-2026 BMW 8 Series (G14/G15/G16) uses a 5X112 bolt pattern and a 66.6 mm center bore.
Factory sizes: 18x8 +30; 18x8 +30 front / 18x9 +41 rear; 19x8 +30; 19x8 +26 front / 19x9 +41 rear; 19x9 +41; 20x8 +26 front / 20x9 +41 rear; 20x9 +41.
Its wheel fasteners use a M14x1.25 thread.
Bolt-on sizes run from 18" to 21" in diameter; see the size table for the offset range at each width.