BMW M2 (F87) 2016-2021 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the BMW M2 built from 2016 to 2021 (Base, Competition, CS).

Fitment specs

Bolt pattern5X120
Center bore72.6 mm
Lug threadM14x1.25
Model years2016-2021
GenerationF87

Every 2016-2021 BMW M2 uses a 5X120 bolt pattern with a 72.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 72.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.25. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the BMW M2 (F87) and the model years each was sold. All of them share the 5X120 bolt pattern.

SubmodelYearsFactory wheel sizes
Base2016-2018See factory sizes below
Competition2019-202118x8.5 +27 front / 18x9 +29 rear
19x8.5 +27 front / 19x9 +29 rear
19x9 +29 front / 19x10 +40 rear
CS202018x8.5 +27 front / 18x9 +29 rear
19x8.5 +27 front / 19x9 +29 rear
19x9 +29 front / 19x10 +40 rear

Factory wheel sizes

Wheel sizes BMW fitted to the 2016-2021 BMW M2 from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
18x8.5 +27 front / 18x9 +29 rear
19x8.5 +27 front / 19x9 +29 rear
19x9 +29 front / 19x10 +40 rear

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2016-2021 BMW M2: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

Base

DiameterWidthFront offsetRear offset
18-20"9"+12 to +35—
18-20"9.5"+18 to +28—
18-20"10"—+23 to +46
18-20"10.5"—+29 to +39

Wider still: 18x11.5 front — / rear +21 to +32; 19x11.5 front — / rear +21 to +32; 20x11.5 front — / rear +21 to +32 fit with modifications (roll rear fender lips, adjustable rear camber arms for -1.5° or more, front camber plates, hub-centric rings if wheel bore is larger than the hub).

Competition, CS

DiameterWidthFront offsetRear offset
18-20"8.5"+5 to +37—
18-20"9"+12 to +35+10 to +39
18-20"9.5"+18 to +28+16 to +45
18-20"10"—+23 to +46
18-20"10.5"—+29 to +39

Wider still: 18x11.5 front — / rear +21 to +32; 19x11.5 front — / rear +21 to +32; 20x11.5 front — / rear +21 to +32 fit with modifications (roll rear fender lips, adjustable rear camber arms for -1.5° or more, front camber plates, hub-centric rings if wheel bore is larger than the hub).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2016-2021 BMW M2. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

Base

Modifications Required (roll rear fender lips, adjustable rear camber arms for -1.5° or more, front camber plates, hub-centric rings if wheel bore is larger than the hub)

Competition, CS

Modifications Required (roll rear fender lips, adjustable rear camber arms for -1.5° or more, front camber plates, hub-centric rings if wheel bore is larger than the hub)

FAQ

What is the bolt pattern of the 2016-2021 BMW M2?

The 2016-2021 BMW M2 (F87) uses a 5X120 bolt pattern and a 72.6 mm center bore.

What size wheels came on the 2016-2021 BMW M2 from the factory?

Factory sizes: 18x8.5 +27 front / 18x9 +29 rear; 19x8.5 +27 front / 19x9 +29 rear; 19x9 +29 front / 19x10 +40 rear.

What lug thread size does the 2016-2021 BMW M2 use?

Its wheel fasteners use a M14x1.25 thread.

What aftermarket wheel sizes fit the 2016-2021 BMW M2 without modifications?

Bolt-on sizes run from 18" to 20" in diameter; see the size table for the offset range at each width.