Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the BMW M2 built from 2023 to 2026.
Every 2023-2026 BMW M2 uses a 5X112 bolt pattern with a 66.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.25. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the BMW M2 (G87) and the model years each was sold. All of them share the 5X112 bolt pattern.
| Submodel | Years |
|---|---|
| Base | 2023-2026 |
Wheel sizes BMW fitted to the 2023-2026 BMW M2 from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 19x9 +20 front / 19x9.5 +20 rear |
| 19x9.5 +20 front / 20x10.5 +20 rear |
| 20x9.5 +20 front / 21x10.5 +20 rear |
Widths and offsets with Verified Fitment on the 2023-2026 BMW M2: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 19-21" | 9.5" | +3 to +25 | — |
| 19-21" | 10" | +9 to +19 | — |
| 19-21" | 10.5" | — | +3 to +25 |
| 19-21" | 11" | — | +9 to +19 |
Wider still: 19x12 front — / rear +1 to +12; 20x12 front — / rear +1 to +12; 21x12 front — / rear +1 to +12 fit with modifications (roll rear fender lips, adjustable rear camber arms for -1.5° or more, front camber plates, hub-centric rings if wheel bore is larger than the hub).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2023-2026 BMW M2. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.
Modifications Required (roll rear fender lips, adjustable rear camber arms for -1.5° or more, front camber plates, hub-centric rings if wheel bore is larger than the hub)






The 2023-2026 BMW M2 (G87) uses a 5X112 bolt pattern and a 66.6 mm center bore.
Factory sizes: 19x9 +20 front / 19x9.5 +20 rear; 19x9.5 +20 front / 20x10.5 +20 rear; 20x9.5 +20 front / 21x10.5 +20 rear.
Its wheel fasteners use a M14x1.25 thread.
Bolt-on sizes run from 19" to 21" in diameter; see the size table for the offset range at each width.