Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Cadillac CTS built from 2003 to 2007.
Every 2003-2007 Cadillac CTS uses a 5X115 bolt pattern with a 70.3 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 70.3 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Cadillac CTS (Sigma) and the model years each was sold. All of them share the 5X115 bolt pattern.
| Submodel | Years |
|---|---|
| Base | 2003-2007 |
Wheel sizes Cadillac fitted to the 2003-2007 Cadillac CTS from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 16x7 +51 |
| 17x7.5 +51 |
| 17x7.5 +51 front / 17x8 +48 rear |
| 18x7.5 +50 |
| 18x7.5 +50 front / 18x8.5 +50 rear |
| 18x8 +45 |
| 19x8 +45 front / 19x9 +45 rear |
| 19x8.5 +43 |
Widths and offsets with Verified Fitment on the 2003-2007 Cadillac CTS: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 16-18" | 7" | +14 to +61 |
| 16-18" | 7.5" | +20 to +62 |
| 16-18" | 8" | +26 to +56 |
| 16-18" | 8.5" | +33 to +49 |
| 16-18" | 9" | +39 to +43 |
The 2003-2007 Cadillac CTS (Sigma) uses a 5X115 bolt pattern and a 70.3 mm center bore.
Factory sizes: 16x7 +51; 17x7.5 +51; 17x7.5 +51 front / 17x8 +48 rear; 18x7.5 +50; 18x7.5 +50 front / 18x8.5 +50 rear; 18x8 +45; 19x8 +45 front / 19x9 +45 rear; 19x8.5 +43.
Its wheel fasteners use a M12x1.5 thread.
Bolt-on sizes run from 16" to 18" in diameter; see the size table for the offset range at each width.