Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Cadillac CTS built from 2008 to 2013 (Base, Luxury, Performance, Premium).
Every 2008-2013 Cadillac CTS uses a 5X120 bolt pattern with a 66.9 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.9 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Cadillac CTS (2nd Gen (Sigma II)) and the model years each was sold. All of them share the 5X120 bolt pattern.
| Submodel | Years |
|---|---|
| Base | 2008-2013 |
| Luxury | 2008-2013 |
| Performance | 2008-2013 |
| Premium | 2008-2013 |
Wheel sizes Cadillac fitted to the 2008-2013 Cadillac CTS from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 17x8 +48 |
| 18x8 +48 |
| 18x8.5 +48 front / 18x9 +32 rear |
| 18x9 +32 |
| 19x8.5 +48 |
| 19x8.5 +48 front / 19x9.5 +43 rear |
| 19x9 +45 front / 19x9.5 +45 rear |
| 19x9 +40 front / 19x10 +40 rear |
| 19x9.5 +43 |
| 19x9.5 +45 |
| 19x10 +40 |
Widths and offsets with Verified Fitment on the 2008-2013 Cadillac CTS: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 17-20" | 8" | +2 to +58 | +2 to +58 |
| 17-20" | 8.5" | +9 to +57 | +9 to +63 |
| 17-20" | 9" | +15 to +50 | +15 to +57 |
| 17-20" | 9.5" | +21 to +44 | +21 to +50 |
| 17-20" | 10" | +28 to +38 | +28 to +44 |
| 17-20" | 10.5" | — | +34 to +38 |
Wider still: 17x11 front +19 to +31 / rear +19 to +37; 17x11.5 front — / rear +26 to +31; 18x11 front +19 to +31 / rear +19 to +37; 18x11.5 front — / rear +26 to +31; 19x11 front +19 to +31 / rear +19 to +37; 19x11.5 front — / rear +26 to +31… fit with modifications (roll front and rear fender lips, camber bolts / adjustable rear camber arms for -1° or more, hub-centric rings for aftermarket wheels).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2008-2013 Cadillac CTS. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.












Modifications Required (roll front and rear fender lips, camber bolts / adjustable rear camber arms for -1° or more, hub-centric rings for aftermarket wheels)
The 2008-2013 Cadillac CTS (2nd Gen (Sigma II)) uses a 5X120 bolt pattern and a 66.9 mm center bore.
Factory sizes: 17x8 +48; 18x8 +48; 18x8.5 +48 front / 18x9 +32 rear; 18x9 +32; 19x8.5 +48; 19x8.5 +48 front / 19x9.5 +43 rear; 19x9 +45 front / 19x9.5 +45 rear; 19x9 +40 front / 19x10 +40 rear; 19x9.5 +43; 19x9.5 +45; 19x10 +40.
Its wheel fasteners use a M14x1.5 thread.
Bolt-on sizes run from 17" to 20" in diameter; see the size table for the offset range at each width.