Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Cadillac Escalade built from 1999 to 2000.
Every 1999-2000 Cadillac Escalade uses a 6X139.7 bolt pattern with a 78.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 78.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Cadillac Escalade (GMT400) and the model years each was sold. All of them share the 6X139.7 bolt pattern.
| Submodel | Years |
|---|---|
| Base | 1999-2000 |
Wheel sizes Cadillac fitted to the 1999-2000 Cadillac Escalade from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 16x7 +31 |
| 17x7.5 +31 |
| 18x8 +31 |
| 19x8.5 +31 |
| 20x9 +31 |
Widths and offsets with Verified Fitment on the 1999-2000 Cadillac Escalade: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 16-22" | 7" | +14 to +37 |
| 16-22" | 7.5" | +20 to +30 |
Wider still: 16x8.5 +12 to +23; 17x8.5 +12 to +23; 18x8.5 +12 to +23; 19x8.5 +12 to +23; 20x8.5 +12 to +23; 21x8.5 +12 to +23… fit with modifications (roll fender lips / trim plastic fender liners, 1-2 in leveling or lift kit for larger tires, hub-centric rings for aftermarket wheels).
The 1999-2000 Cadillac Escalade (GMT400) uses a 6X139.7 bolt pattern and a 78.1 mm center bore.
Factory sizes: 16x7 +31; 17x7.5 +31; 18x8 +31; 19x8.5 +31; 20x9 +31.
Its wheel fasteners use a M14x1.5 thread.
Bolt-on sizes run from 16" to 22" in diameter; see the size table for the offset range at each width.