Cadillac Escalade 4th Gen (K2XX) 2015-2020 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Cadillac Escalade built from 2015 to 2020 (Standard, Luxury, Premium, Premium Luxury, Platinum).

Fitment specs

Bolt pattern6X139.7
Center bore78.1 mm
Lug threadM14x1.5
Model years2015-2020
Generation4th Gen (K2XX)

Every 2015-2020 Cadillac Escalade uses a 6X139.7 bolt pattern with a 78.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 78.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Cadillac Escalade (4th Gen (K2XX)) and the model years each was sold. All of them share the 6X139.7 bolt pattern.

SubmodelYearsFactory wheel sizes
Standard2015-2020See factory sizes below
Luxury2015-202022x9 +24
Premium2015-201622x9 +24
Premium Luxury2017-202022x9 +24
Platinum2015-202022x9 +24

Factory wheel sizes

Wheel sizes Cadillac fitted to the 2015-2020 Cadillac Escalade from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
20x9 +24
20x9 +27
21x9 +24
22x9 +24
24x9.5 +20
24x10 +20

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2015-2020 Cadillac Escalade: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

Standard

DiameterWidthOffset range
18-24"9"+19 to +34

Wider still: 18x9.5 +1 to +27; 18x10 +7 to +21; 19x9.5 +1 to +27; 19x10 +7 to +21; 20x9.5 +1 to +27; 20x10 +7 to +21… fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).

Luxury, Premium, Premium Luxury, Platinum

DiameterWidthOffset range
22-24"9"+24 to +31

Wider still: 22x9.5 +6 to +24; 22x10 +12 to +18; 23x9.5 +6 to +24; 23x10 +12 to +18; 24x9.5 +6 to +24; 24x10 +12 to +18… fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2015-2020 Cadillac Escalade. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

Standard

Luxury, Premium, Premium Luxury, Platinum

FAQ

What is the bolt pattern of the 2015-2020 Cadillac Escalade?

The 2015-2020 Cadillac Escalade (4th Gen (K2XX)) uses a 6X139.7 bolt pattern and a 78.1 mm center bore.

What size wheels came on the 2015-2020 Cadillac Escalade from the factory?

Factory sizes: 20x9 +24; 20x9 +27; 21x9 +24; 22x9 +24; 24x9.5 +20; 24x10 +20.

What lug thread size does the 2015-2020 Cadillac Escalade use?

Its wheel fasteners use a M14x1.5 thread.

What aftermarket wheel sizes fit the 2015-2020 Cadillac Escalade without modifications?

Bolt-on sizes run from 18" to 24" in diameter; see the size table for the offset range at each width.