Chevrolet Camaro (F-body) 1982-1992 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Chevrolet Camaro built from 1982 to 1992 (Sport Coupe, Berlinetta, RS, Z28, IROC-Z, Z28).

Fitment specs

Bolt pattern5X120.65 / 5X120
Center bore70.3 mm
Lug threadM12x1.5
Model years1982-1992
GenerationF-body

Every 1982-1992 Chevrolet Camaro uses a 5X120.65 / 5X120 bolt pattern with a 70.3 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 70.3 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Chevrolet Camaro (F-body) and the model years each was sold. All of them share the 5X120.65 / 5X120 bolt pattern.

SubmodelYears
Sport Coupe1982-1986
Berlinetta1982-1986
RS1987-1992
Z281982-1987
IROC-Z1985-1990
Z281991-1992

Factory wheel sizes

Wheel sizes Chevrolet fitted to the 1982-1992 Chevrolet Camaro from the factory. Offsets are ET in millimeters.

Factory size
14x6 +12.7
14x7 +8
15x7 +7.6
16x8 +0 front / 16x8 +16 rear
16x8 +0 front / 16x8 +20 rear
16x8 +16
16x8 +20

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 1982-1992 Chevrolet Camaro: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
14-17"6"-22 to +23
14-17"6.5"-16 to +20
14-17"7"-10 to +13
14-17"7.5"-3 to +7

Wider still: 14x8.5 -11 to +0; 15x8.5 -11 to +0; 16x8.5 -11 to +0; 17x8.5 -11 to +0 fit with modifications (roll front and rear fender lips, camber adjustment (eccentric bolts / adjustable arms) to tuck the tire, hub-centric rings for aftermarket wheels).

FAQ

What is the bolt pattern of the 1982-1992 Chevrolet Camaro?

The 1982-1992 Chevrolet Camaro (F-body) uses a 5X120.65 / 5X120 bolt pattern and a 70.3 mm center bore.

What size wheels came on the 1982-1992 Chevrolet Camaro from the factory?

Factory sizes: 14x6 +12.7; 14x7 +8; 15x7 +7.6; 16x8 +0 front / 16x8 +16 rear; 16x8 +0 front / 16x8 +20 rear; 16x8 +16; 16x8 +20.

What lug thread size does the 1982-1992 Chevrolet Camaro use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 1982-1992 Chevrolet Camaro without modifications?

Bolt-on sizes run from 14" to 17" in diameter; see the size table for the offset range at each width.