Chevrolet Camaro (F-body) 1993-2002 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Chevrolet Camaro built from 1993 to 2002 (Base, RS, Z28, SS).

Fitment specs

Bolt pattern5X120.65 / 5X120
Center bore70.3 mm
Lug threadM12x1.5
Model years1993-2002
GenerationF-body

Every 1993-2002 Chevrolet Camaro uses a 5X120.65 / 5X120 bolt pattern with a 70.3 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 70.3 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Chevrolet Camaro (F-body) and the model years each was sold. All of them share the 5X120.65 / 5X120 bolt pattern.

SubmodelYearsFactory wheel sizes
Base1993-2002See factory sizes below
RS1996-1997See factory sizes below
Z281993-200216x8 +55
SS1996-200217x9 +50

Factory wheel sizes

Wheel sizes Chevrolet fitted to the 1993-2002 Chevrolet Camaro from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
16x7.5 +55
16x8 +55
17x9 +50

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 1993-2002 Chevrolet Camaro: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

Base, RS, Z28

DiameterWidthFront offsetRear offset
16-18"8"+38 to +60+22 to +62
16-18"8.5"+44 to +54+28 to +56
16-18"9"—+35 to +49
16-18"9.5"—+41 to +43

SS

DiameterWidthFront offsetRear offset
17-18"9"+50+35 to +50
17-18"9.5"—+41 to +43

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 1993-2002 Chevrolet Camaro. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

Base, RS, Z28

Modifications Required (roll front and rear fender lips, camber adjustment (eccentric bolts / adjustable arms) to tuck the tire, hub-centric rings for aftermarket wheels)

SS

Modifications Required (roll front and rear fender lips, camber adjustment (eccentric bolts / adjustable arms) to tuck the tire, hub-centric rings for aftermarket wheels)

FAQ

What is the bolt pattern of the 1993-2002 Chevrolet Camaro?

The 1993-2002 Chevrolet Camaro (F-body) uses a 5X120.65 / 5X120 bolt pattern and a 70.3 mm center bore.

What size wheels came on the 1993-2002 Chevrolet Camaro from the factory?

Factory sizes: 16x7.5 +55; 16x8 +55; 17x9 +50.

What lug thread size does the 1993-2002 Chevrolet Camaro use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 1993-2002 Chevrolet Camaro without modifications?

Bolt-on sizes run from 16" to 18" in diameter; see the size table for the offset range at each width.