Chevrolet Equinox 2nd Gen 2010-2017 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Chevrolet Equinox built from 2010 to 2017 (LS, 1LT, 2LT, LTZ, L).

Fitment specs

Bolt pattern5X120
Center bore66.9 mm
Lug threadM14x1.5
Model years2010-2017
Generation2nd Gen

Every 2010-2017 Chevrolet Equinox uses a 5X120 bolt pattern with a 66.9 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.9 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Chevrolet Equinox (2nd Gen) and the model years each was sold. All of them share the 5X120 bolt pattern.

SubmodelYearsFactory wheel sizes
LS2010-201717x7 +43
1LT2010-2017See factory sizes below
2LT2010-2017See factory sizes below
LTZ2010-201717x7 +43
L2016-201717x7 +43

Factory wheel sizes

Wheel sizes Chevrolet fitted to the 2010-2017 Chevrolet Equinox from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
17x7 +43
18x7 +46
19x7 +46

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2010-2017 Chevrolet Equinox: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
17-20"7"+26 to +48
17-20"7.5"+32 to +42

Wider still: 17x8.5 +24 to +35; 18x8.5 +24 to +35; 19x8.5 +24 to +35; 20x8.5 +24 to +35 fit with modifications (roll fender lips, trim the plastic inner fender liner, hub-centric rings for aftermarket wheels).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2010-2017 Chevrolet Equinox. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

Modifications Required (roll fender lips, trim the plastic inner fender liner, hub-centric rings for aftermarket wheels)

FAQ

What is the bolt pattern of the 2010-2017 Chevrolet Equinox?

The 2010-2017 Chevrolet Equinox (2nd Gen) uses a 5X120 bolt pattern and a 66.9 mm center bore.

What size wheels came on the 2010-2017 Chevrolet Equinox from the factory?

Factory sizes: 17x7 +43; 18x7 +46; 19x7 +46.

What lug thread size does the 2010-2017 Chevrolet Equinox use?

Its wheel fasteners use a M14x1.5 thread.

What aftermarket wheel sizes fit the 2010-2017 Chevrolet Equinox without modifications?

Bolt-on sizes run from 17" to 20" in diameter; see the size table for the offset range at each width.