Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Chevrolet Equinox built from 2025 to 2026 (ACTIV, LT, RS).
Every 2025-2026 Chevrolet Equinox uses a 5X115 bolt pattern with a 70.3 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 70.3 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Chevrolet Equinox (4th Gen) and the model years each was sold. All of them share the 5X115 bolt pattern.
| Submodel | Years |
|---|---|
| ACTIV | 2025-2026 |
| LT | 2025-2026 |
| RS | 2025-2026 |
Wheel sizes Chevrolet fitted to the 2025-2026 Chevrolet Equinox from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 17x7.5 +31 |
| 18x7.5 +31 |
| 19x7.5 +31 |
Widths and offsets with Verified Fitment on the 2025-2026 Chevrolet Equinox: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 17-21" | 7.5" | +14 to +36 |
| 17-21" | 8" | +20 to +30 |
Wider still: 17x9 +12 to +23; 18x9 +12 to +23; 19x9 +12 to +23; 20x9 +12 to +23; 21x9 +12 to +23 fit with modifications (roll fender lips, trim the plastic inner fender liner, hub-centric rings for aftermarket wheels).
The 2025-2026 Chevrolet Equinox (4th Gen) uses a 5X115 bolt pattern and a 70.3 mm center bore.
Factory sizes: 17x7.5 +31; 18x7.5 +31; 19x7.5 +31.
Its wheel fasteners use a M12x1.5 thread.
Bolt-on sizes run from 17" to 21" in diameter; see the size table for the offset range at each width.