Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Chevrolet S-10 built from 1994 to 2004 (Base, LS, SS, ZR2, Xtreme).
Every 1994-2004 Chevrolet S-10 uses a 5X120.65 bolt pattern with a 70.3 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 70.3 mm inner diameter so the wheel centers on the hub instead of the lugs. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Chevrolet S-10 (GMT325) and the model years each was sold. All of them share the 5X120.65 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| Base | 1994-2004 | See factory sizes below |
| LS | 1994-2004 | See factory sizes below |
| SS | 1994-1998 | 16x8 |
| ZR2 | 1994-2004 | See factory sizes below |
| Xtreme | 2001-2004 | 16x8 -6.4 |
Wheel sizes Chevrolet fitted to the 1994-2004 Chevrolet S-10 from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 15x7 +13 |
| 15x7 +30 |
| 15x7 +50 |
| 16x8 -6.4 |
Widths and offsets with Verified Fitment on the 1994-2004 Chevrolet S-10: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 15-17" | 7" | -4 to +23 |
| 15-17" | 7.5" | +2 to +29 |
| 15-17" | 8" | +9 to +36 |
Wider still: 15x8.5 -6 to +42; 15x9 +1 to +36; 16x8.5 -6 to +42; 16x9 +1 to +36; 17x8.5 -6 to +42; 17x9 +1 to +36 fit with modifications (torsion-bar / front leveling for larger tires (4wd), trim front bumper valance and inner fender liner, hub-centric rings for aftermarket wheels).
| Diameter | Width | Offset range |
|---|---|---|
| 16-17" | 8" | -6 to +4 |
Wider still: 16x8.5 -6 to +42; 16x9 +1 to +36; 17x8.5 -6 to +42; 17x9 +1 to +36 fit with modifications (torsion-bar / front leveling for larger tires (4wd), trim front bumper valance and inner fender liner, hub-centric rings for aftermarket wheels).
The 1994-2004 Chevrolet S-10 (GMT325) uses a 5X120.65 bolt pattern and a 70.3 mm center bore.
Factory sizes: 15x7 +13; 15x7 +30; 15x7 +50; 16x8 -6.4.
Bolt-on sizes run from 15" to 17" in diameter; see the size table for the offset range at each width.