Chevrolet Traverse (Lambda) 2009-2017 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Chevrolet Traverse built from 2009 to 2017 (LS, 1LT, 2LT, LTZ).

Fitment specs

Bolt pattern6X132
Center bore74.5 mm
Lug threadM14x1.5
Model years2009-2017
GenerationLambda

Every 2009-2017 Chevrolet Traverse uses a 6X132 bolt pattern with a 74.5 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 74.5 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Chevrolet Traverse (Lambda) and the model years each was sold. All of them share the 6X132 bolt pattern.

SubmodelYearsFactory wheel sizes
LS2009-201717x7.5 +50
1LT2009-2017See factory sizes below
2LT2009-2017See factory sizes below
LTZ2009-2017See factory sizes below

Factory wheel sizes

Wheel sizes Chevrolet fitted to the 2009-2017 Chevrolet Traverse from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
17x7.5 +50
18x7.5 +50
20x7.5 +50

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2009-2017 Chevrolet Traverse: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

LS

DiameterWidthOffset range
17-22"7.5"+33 to +55
17-22"8"+39 to +49

Wider still: 17x9 +31 to +42; 18x9 +31 to +42; 19x9 +31 to +42; 20x9 +31 to +42; 21x9 +31 to +42; 22x9 +31 to +42 fit with modifications (roll fender lips, trim the plastic inner fender liner, hub-centric rings for aftermarket wheels).

1LT, 2LT, LTZ

DiameterWidthOffset range
17-22"7.5"+33 to +55
17-22"8"+39 to +49

Wider still: 17x9 +31 to +42; 18x9 +31 to +42; 19x9 +31 to +42; 20x9 +31 to +42; 21x9 +31 to +42; 22x9 +31 to +42 fit with modifications (roll fender lips, trim the plastic inner fender liner, hub-centric rings for aftermarket wheels).

FAQ

What is the bolt pattern of the 2009-2017 Chevrolet Traverse?

The 2009-2017 Chevrolet Traverse (Lambda) uses a 6X132 bolt pattern and a 74.5 mm center bore.

What size wheels came on the 2009-2017 Chevrolet Traverse from the factory?

Factory sizes: 17x7.5 +50; 18x7.5 +50; 20x7.5 +50.

What lug thread size does the 2009-2017 Chevrolet Traverse use?

Its wheel fasteners use a M14x1.5 thread.

What aftermarket wheel sizes fit the 2009-2017 Chevrolet Traverse without modifications?

Bolt-on sizes run from 17" to 22" in diameter; see the size table for the offset range at each width.