Chevrolet Traverse (C1XX) 2024-2026 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Chevrolet Traverse built from 2024 to 2026 (LT, Z71, RS, High Country).

Fitment specs

Bolt pattern6X120
Center bore66.9 mm
Lug threadM14x1.5
Model years2024-2026
GenerationC1XX

Every 2024-2026 Chevrolet Traverse uses a 6X120 bolt pattern with a 66.9 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.9 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Chevrolet Traverse (C1XX) and the model years each was sold. All of them share the 6X120 bolt pattern.

SubmodelYearsFactory wheel sizes
LT2024-202618x7.5 +50
Z712024-202618x8 +50
RS2024-202622x8.5 +50
High Country2025-202622x8.5 +50

Factory wheel sizes

Wheel sizes Chevrolet fitted to the 2024-2026 Chevrolet Traverse from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
18x7.5 +50
18x8 +50
20x8 +50
22x8.5 +50

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2024-2026 Chevrolet Traverse: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

LT

DiameterWidthOffset range
18-23"7.5"+26 to +60
18-23"8"+33 to +55
18-23"8.5"+39 to +49

Wider still: 18x9.5 +31 to +42; 19x9.5 +31 to +42; 20x9.5 +31 to +42; 21x9.5 +31 to +42; 22x9.5 +31 to +42; 23x9.5 +31 to +42 fit with modifications (roll fender lips, trim the plastic inner fender liner, hub-centric rings for aftermarket wheels).

Z71

DiameterWidthOffset range
18-23"8"+33 to +55
18-23"8.5"+39 to +49

Wider still: 18x9.5 +31 to +42; 19x9.5 +31 to +42; 20x9.5 +31 to +42; 21x9.5 +31 to +42; 22x9.5 +31 to +42; 23x9.5 +31 to +42 fit with modifications (roll fender lips, trim the plastic inner fender liner, hub-centric rings for aftermarket wheels).

RS, High Country

DiameterWidthOffset range
22-23"8.5"+39 to +50

Wider still: 22x9.5 +31 to +42; 23x9.5 +31 to +42 fit with modifications (roll fender lips, trim the plastic inner fender liner, hub-centric rings for aftermarket wheels).

FAQ

What is the bolt pattern of the 2024-2026 Chevrolet Traverse?

The 2024-2026 Chevrolet Traverse (C1XX) uses a 6X120 bolt pattern and a 66.9 mm center bore.

What size wheels came on the 2024-2026 Chevrolet Traverse from the factory?

Factory sizes: 18x7.5 +50; 18x8 +50; 20x8 +50; 22x8.5 +50.

What lug thread size does the 2024-2026 Chevrolet Traverse use?

Its wheel fasteners use a M14x1.5 thread.

What aftermarket wheel sizes fit the 2024-2026 Chevrolet Traverse without modifications?

Bolt-on sizes run from 18" to 23" in diameter; see the size table for the offset range at each width.