Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Chrysler Town & Country built from 1996 to 2000 (SX, LX, LXi, Limited).
Every 1996-2000 Chrysler Town & Country uses a 5X114.3 bolt pattern with a 71.5 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 71.5 mm inner diameter so the wheel centers on the hub instead of the lugs. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Chrysler Town & Country (NS) and the model years each was sold. All of them share the 5X114.3 bolt pattern.
| Submodel | Years |
|---|---|
| SX | 1996-2000 |
| LX | 1996-2000 |
| LXi | 1996-2000 |
| Limited | 1996-2000 |
Wheel sizes Chrysler fitted to the 1996-2000 Chrysler Town & Country from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 15x6 +40 |
| 16x6.5 +40 |
| 17x7 +40 |
Widths and offsets with Verified Fitment on the 1996-2000 Chrysler Town & Country: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 15-18" | 6" | +23 to +46 |
| 15-18" | 6.5" | +29 to +39 |
Wider still: 15x7.5 +21 to +32; 16x7.5 +21 to +32; 17x7.5 +21 to +32; 18x7.5 +21 to +32 fit with modifications (trim the fender liners, camber / alignment adjustment, wheel alignment after install).
The 1996-2000 Chrysler Town & Country (NS) uses a 5X114.3 bolt pattern and a 71.5 mm center bore.
Factory sizes: 15x6 +40; 16x6.5 +40; 17x7 +40.
Bolt-on sizes run from 15" to 18" in diameter; see the size table for the offset range at each width.