Chrysler Voyager (RS) 2001-2003 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Chrysler Voyager built from 2001 to 2003 (Base, LX, eC).

Fitment specs

Bolt pattern5X114.3
Center bore71.5 mm
Lug threadM12x1.5
Model years2001-2003
GenerationRS

Every 2001-2003 Chrysler Voyager uses a 5X114.3 bolt pattern with a 71.5 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 71.5 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Chrysler Voyager (RS) and the model years each was sold. All of them share the 5X114.3 bolt pattern.

SubmodelYearsFactory wheel sizes
Base2001-2003See factory sizes below
LX2001-200315x6.5 +40
eC2002-2003See factory sizes below

Factory wheel sizes

Wheel sizes Chrysler fitted to the 2001-2003 Chrysler Voyager from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
15x6.5 +40
16x6.5 +40
17x6.5 +40
17x7 +40
18x7 +40

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2001-2003 Chrysler Voyager: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
15-17"6.5"+23 to +45
15-17"7"+29 to +39

Wider still: 15x8 +21 to +32; 16x8 +21 to +32; 17x8 +21 to +32 fit with modifications (hub-centric rings for aftermarket bores, roll fender lips, check caliper and suspension clearance on wider wheels).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2001-2003 Chrysler Voyager. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

Modifications Required (hub-centric rings for aftermarket bores, roll fender lips, check caliper and suspension clearance on wider wheels)

FAQ

What is the bolt pattern of the 2001-2003 Chrysler Voyager?

The 2001-2003 Chrysler Voyager (RS) uses a 5X114.3 bolt pattern and a 71.5 mm center bore.

What size wheels came on the 2001-2003 Chrysler Voyager from the factory?

Factory sizes: 15x6.5 +40; 16x6.5 +40; 17x6.5 +40; 17x7 +40; 18x7 +40.

What lug thread size does the 2001-2003 Chrysler Voyager use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 2001-2003 Chrysler Voyager without modifications?

Bolt-on sizes run from 15" to 17" in diameter; see the size table for the offset range at each width.