Chrysler Voyager (RU) 2020-2025 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Chrysler Voyager built from 2020 to 2025 (L, LX, LXi).

Fitment specs

Bolt pattern5X127
Center bore71.5 mm
Lug threadM12x1.5
Model years2020-2025
GenerationRU

Every 2020-2025 Chrysler Voyager uses a 5X127 bolt pattern with a 71.5 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 71.5 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Chrysler Voyager (RU) and the model years each was sold. All of them share the 5X127 bolt pattern.

SubmodelYearsFactory wheel sizes
L2020-202117x7 +51
LX2020-202517x7 +51
LXi2020-202117x7 +51

Factory wheel sizes

Wheel sizes Chrysler fitted to the 2020-2025 Chrysler Voyager from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
17x7 +51
18x7.5 +51
19x7.5 +51
20x7.5 +51
20x8 +45

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2020-2025 Chrysler Voyager: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
17-21"7"+34 to +56
17-21"7.5"+40 to +50

Wider still: 17x8.5 +32 to +43; 18x8.5 +32 to +43; 19x8.5 +32 to +43; 20x8.5 +32 to +43; 21x8.5 +32 to +43 fit with modifications (hub-centric rings for aftermarket bores, roll fender lips, check caliper and suspension clearance on wider wheels).

FAQ

What is the bolt pattern of the 2020-2025 Chrysler Voyager?

The 2020-2025 Chrysler Voyager (RU) uses a 5X127 bolt pattern and a 71.5 mm center bore.

What size wheels came on the 2020-2025 Chrysler Voyager from the factory?

Factory sizes: 17x7 +51; 18x7.5 +51; 19x7.5 +51; 20x7.5 +51; 20x8 +45.

What lug thread size does the 2020-2025 Chrysler Voyager use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 2020-2025 Chrysler Voyager without modifications?

Bolt-on sizes run from 17" to 21" in diameter; see the size table for the offset range at each width.