Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Dodge Challenger built from 2011 to 2023 (SE, SXT, GT, R/T, T/A, Scat Pack, SRT8 392, SRT 392, SRT Hellcat, SRT Hellcat Redeye, SRT Super Stock, SRT Demon, SRT Demon 170).
Every 2011-2023 Dodge Challenger uses a 5X115 bolt pattern with a 71.5 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 71.5 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Dodge Challenger (LC) and the model years each was sold. All of them share the 5X115 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| SE | 2011-2014 | 18x7.5 +24 |
| SXT | 2011-2023 | 18x7.5 +24 |
| GT | 2017-2023 | 20x8 +24 20x8 +50 20x9 +22 20x9 +22.5 |
| R/T | 2011-2023 | 18x7.5 +24 20x8 +24 20x8 +50 20x9 +22 20x9 +22.5 20x9 +25.5 20x9.5 +18 |
| T/A | 2017-2023 | See factory sizes below |
| Scat Pack | 2015-2023 | See factory sizes below |
| SRT8 392 | 2011-2014 | See factory sizes below |
| SRT 392 | 2015-2018 | 20x8 +24 20x8.5 +25 20x9 +22.5 |
| SRT Hellcat | 2015-2023 | 20x9.5 +18 |
| SRT Hellcat Redeye | 2019-2023 | 20x9.5 +18 |
| SRT Super Stock | 2020-2023 | 18x7.5 +24 |
| SRT Demon | 2018 | 18x7.5 +24 |
| SRT Demon 170 | 2023 | See factory sizes below |
Wheel sizes Dodge fitted to the 2011-2023 Dodge Challenger from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 17x7 +22 |
| 18x7.5 +24 |
| 19x7.5 +24 |
| 19x7.5 +55 |
| 19x8 +50 |
| 20x7.5 +55 |
| 20x8 +24 |
| 20x8 +50 |
| 20x8.5 +25 |
| 20x8.5 +50 |
| 20x9 +22 |
| 20x9 +25.5 |
| 20x9.5 +18 |
| 20x11 -2 |
| 21x8 +24 |
| 21x8.5 +24 |
| 21x9 +20 |
Widths and offsets with Verified Fitment on the 2011-2023 Dodge Challenger: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 18-21" | 7.5" | +1 to +34 |
| 18-21" | 8" | +7 to +40 |
| 18-21" | 8.5" | +13 to +47 |
| 18-21" | 9" | +20 to +41 |
Wider still: 18x9.5 +5 to +41; 18x10 +12 to +35; 19x9.5 +5 to +41; 19x10 +12 to +35; 20x9.5 +5 to +41; 20x10 +12 to +35… fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).
| Diameter | Width | Offset range |
|---|---|---|
| 20-21" | 8" | +7 to +34 |
| 20-21" | 8.5" | +13 to +40 |
| 20-21" | 9" | +20 to +41 |
Wider still: 20x9.5 +5 to +41; 20x10 +12 to +35; 21x9.5 +5 to +41; 21x10 +12 to +35 fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).
| Diameter | Width | Offset range |
|---|---|---|
| 17-21" | 7" | -6 to +32 |
| 17-21" | 7.5" | +1 to +38 |
| 17-21" | 8" | +7 to +45 |
| 17-21" | 8.5" | +13 to +48 |
| 17-21" | 9" | +20 to +41 |
Wider still: 17x9.5 +5 to +41; 17x10 +12 to +35; 18x9.5 +5 to +41; 18x10 +12 to +35; 19x9.5 +5 to +41; 19x10 +12 to +35… fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).
| Diameter | Width | Offset range |
|---|---|---|
| 20-21" | 9.5" | +18 to +28 |
Wider still: 20x10 +12 to +35; 21x10 +12 to +35 fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2011-2023 Dodge Challenger. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.
Modifications Required (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install)
Modifications Required (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install)
Modifications Required (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install)
The 2011-2023 Dodge Challenger (LC) uses a 5X115 bolt pattern and a 71.5 mm center bore.
Factory sizes: 17x7 +22; 18x7.5 +24; 19x7.5 +24; 19x7.5 +55; 19x8 +50; 20x7.5 +55; 20x8 +24; 20x8 +50; 20x8.5 +25; 20x8.5 +50; 20x9 +22; 20x9 +25.5; 20x9.5 +18; 20x11 -2; 21x8 +24; 21x8.5 +24; 21x9 +20.
Its wheel fasteners use a M14x1.5 thread.
Bolt-on sizes run from 17" to 21" in diameter; see the size table for the offset range at each width.